There are currently no product reviews.
This manual was the factory original. Excellent value and contained all the details I needed. Easy dowwnload provided the information when I needed it.
Impeccable, document trรจs complet. Perfect, i get all i need. All schematic are correct. Thanks
The manual is of better quality compared to other. I found it less expensive and therefore it it is the best buy cost vs quality.
I bought the service-manual of the sony ICB-1020(an old transmitter-receiver) at "www.Owners-Manual.com", I found the service-manual for a fairly cheap price(in comparison with other sellers). I filled in some questions, payed the order with Ideal, and within 24 hours I had my service manual. I was very happy:In no time I had my service-manual and everything, but literally everything was noted down in the manual; the electronic scheme, the parts list, etcetera.
A very practical, reference-document.
This comprehesive service maual was greatly appreciated, as was the digital download.
SECTION 5 MECHANICAL ADJUSTMENTS
1. Clean the following parts with a denatured-alcohol-moistened swab: playback head pinch roller rubber belt capstan idlers 2. Demagnetize the playback head with a head demagnetizer. 3. Do not use a magnetized screwdriver for the adjustments. 4. After the adjustments, apply suitable locking compound to the parts adjusted. 5. The adjustments should be performed with the power supply voltage unless otherwise noted. â¢ Torque Measurement
Mode Forward Forward Back Tension Reverse Reverse Back Tension FF, REW CQ-102RC Torque Meter CQ-102C Meter Reading 2.95 â 6.37 Nâ¢m 30 â 65 gâ¢cm (0.42 â 0.90 ozâ¢inch) 0.05 â 0.44 Nâ¢m 0.5 â 4.5 gâ¢cm (0.01 â 0.06 ozâ¢inch) 2.95 â 6.37 Nâ¢m 30 â 65 gâ¢cm (0.42 â 0.90 ozâ¢inch) 0.05 â 0.44 Nâ¢m 0.5 â 4.5 gâ¢cm (0.01 - 0.06 ozâ¢inch) 5.89 â 19.61 Nâ¢m 60 â 200 gâ¢cm (0.83 â 2.78 ozâ¢inch)
SECTION 6 ELECTRICAL ADJUSTMENTS
6-1. TEST MODE <Set the Test Mode> 1. Set the âOFFâ mode. 2. Push the preset  button. 3. Push the preset  button. 4. Press the preset  button for more than two seconds. 5. Then the display indicates all lights, the test mode is set. <Release the Test mode> 1. Push the [OFF] button. Adjustment Location:
â SET UPPER VIEW â
Tape Speed Adjustment
TAPE DECK SECTION
Tape Speed Adjustment Setting:
0 dB=0.775 V
speed checker or frequency counter test tape WS-48A (3 kHz, 0 dB) set 10 kâ¦
AUDIO OUT jack (J331)
Procedure: 1. Put the set into the FWD PB mode. 2. Adjust adjustment resistor for inside capstan motor so that the reading on the speed checker or frequency counter becomes in specification. Specification: Constant speed
Speed checker â1.5 to +2.5% Frequency counter 2,955 to 3,075 Hz
â¢ Tape Tension Measurement
Mode Forward Tension Meter CQ-403A Meter Reading more than 0.88 N more than 90 g (more than 3.18 oz) more than 0.88 N more than 90 g (more than 3.18 oz)
0 dB=1 ÂµV
The tuner section has no adjustment.