|
Who's Online
There currently are 5882 guests and 4 members online.
|
Categories
|
Information
|
Featured Product
|
|
|
|
|
There are currently no product reviews.
;
More than pleased with my prurchase, very good product for the price.
;
Manual-link came 30 minutes after having paid for an extremely rare (40 years old) item (sony icr-120) and helped me to get the radio rework again. So really good help for me, fast and reliable delivery and -taken that into consideration- a very reasonable price for that service. So thanks again! Mike, Germany
;
Some of the pictures in this manual are a bit irritating. I had to dissassemble the unit and some of the screws have different threads, which is not mentioned in this manual. Also some of the drawings of the boards look different than the actual boards.
After all, the manual was very useful. I was able to recalibrate the capstan drive and it is working fine again.
;
This manual is very good. 303 pages scanned in a very high resolution. My camera has bad, leaking capacitors which all of the V5000 models are suffering from these days.
There is a huge part list with all capacitors, transistors etc. in this manual which helped me a lot. Otherwise I would not have been able to buy replacement parts.
The dissassembly guide is very enormous and detailed. Unlike on the Panasonic MS1 manual I downloaded here it actually looks like the real parts look. And the screws are labeled correctly, so you shouldn't have any left after the repair. ;)
;
has all the schematics you could need,and very well laid out format also has all part numbers along with an exploded view which is helpful
SECTION 4 MECHANICAL ADJUSTMENT
1. PRECAUTION Clean the following parts with a denatured-alcohol-moistened swab: playback head pinch roller rubber belts capstan Do not use a magnetized screwdriver for the adjustments.
SECTION 5 ELECTRICAL ADJUSTMENT
TAPE SECTION
Test Tape Tape WS-48A Signal 3 kHz, 0 dB Used for Tape speed adjustment 0 dB = 0.775 V
2.
Torque Measurement Mode Torque Meter FWD FWD Back Tension FF, REW CQ-102C CQ-102C CQ-201B
Meter Reading 20 to 42 g�cm (0.27 to 0.58 oz�inch) More than 2.0 g�cm (More than 0.027 oz�inch) More than 50 g�cm (More than 0.69 oz�inch)
Tape Speed Adjustment Procedure: Mode: Playback
Test tape WS-48A (3 kHz, 0 dB) 16 � + � digital frequency counter
Set
J301 (phones)
Adjustment Value: normal tape speed Adjust the tape speed adjustment RV601, so that the freqency counter reading becomes 3,000Hz. Specification Value: Digital frequency counter 2,970 to 3,030 Hz Frequency difference between the beginning and the end of the tape should be within 1.5 % (45 Hz). Adjustment Location:
RV601
�7�
|
|
|
> |
|