|
Who's Online
There currently are 5826 guests online.
|
Categories
|
Information
|
Featured Product
|
|
|
|
|
There are currently no product reviews.
;
Very easy site. Great service and quick release for download. Manuals are of good quality.
Joop - The Netherlands
;
Very good manual, in depth and complete. Only criticism is that some of the circuit diagrams are slightly blurry and hard to follow for long periods of time, but this is to be expected. Perfect for any maintenance required. Also contains the wiring diagrams of the control cable for constructing extensions.
;
Received a quick response, material was exactly what it was supposed to be. The service did everything I expected it to do. would use service again.
;
Detailed SONY CFD980 Service Manual at an easy to find one stop shopping. Make my radio hobby technically interesting. Thanks.
;
Excellent service from Owner-Manuals.com, good prices and quick turn around. The supplied PDF was good enough quality to be enlarged sufficiently to read component values.
2-3-5. Removal of the HP-65 Board (SX-M700/M100)
Procedure 1. Remove the top panel. (Refer to section, �2-1. REMOVAL OF THE EXTERNAL PANELS�.) 2. Remove the front panel assembly. (Refer to section, �21. REMOVAL OF THE EXTERNAL PANELS�.) 3. Remove the fixing nut securing the headphone jack. 4. Remove the fixing nut securing the volume control potentiometer.
Connector CN1 SX-M700 (from SW-722 board) HP-65 board Headphone jack Connector CN2 (from MT-105 board) SX-M100 (from AA-93 board)
2-3-7. Removal of the VR-237 Board (SX-M700/M100)
Procedure 1. Remove the top panel. (Refer to section, �2-1. REMOVAL OF THE EXTERNAL PANELS�.) 2. Remove the front panel assembly. (Refer to section, �21. REMOVAL OF THE EXTERNAL PANELS�.) 3. Remove the four fixing nuts securing the volume control potentiometers. 4. Disconnect the connectors (CN1, CN2) from the VR-237 board.
VR-237 board
CN1 CN2 Volume control potentimeter
Volume control potentiometer
Fixing nuts
Fixing nuts
2-3-6. Removal of the SW-722 Board (SX-M700) 2-3-8. Removal of the SW-710 Board (SX-M700/M100)
Procedure 1. Remove the top panel. (Refer to section, �2-1. REMOVAL OF THE EXTERNAL PANELS�.) 2. Remove the front panel assembly. (Refer to section, �21. REMOVAL OF THE EXTERNAL PANELS�.) 3. Remove the selector knob. 4. Disconnect the connector (CN1) from the HP-65 board. 5. Remove the fixing nut securing the volume control potentiometer. 6. Disconnect the connector (CN2) from the SW-722 board.
Connector CN1 HP-65 board SW-722 board
Procedure 1. Remove the front panel assembly. (Refer to section, �21. REMOVAL OF THE EXTERNAL PANELS�.) 2. Disconnect the connector (CN1) from the SW-710 board. 3. Remove the two fixing screws (BVTP 3x8) securing the SW-710 board.
Volume control potentiometer Connector CN2 (from AA-93 board) Fixing nuts
Connector CN1 (from CPU-181 board) Screws (2 pcs) BVTP 3x8 SW-710 board
Selector knob
2-12(E)
SX-M700
|
|
|
> |
|