|
Who's Online
There currently are 6022 guests online.
|
Categories
|
Information
|
Featured Product
|
|
|
|
|
There are currently no product reviews.
;
Some of the pictures in this manual are a bit irritating. I had to dissassemble the unit and some of the screws have different threads, which is not mentioned in this manual. Also some of the drawings of the boards look different than the actual boards.
After all, the manual was very useful. I was able to recalibrate the capstan drive and it is working fine again.
;
This manual is very good. 303 pages scanned in a very high resolution. My camera has bad, leaking capacitors which all of the V5000 models are suffering from these days.
There is a huge part list with all capacitors, transistors etc. in this manual which helped me a lot. Otherwise I would not have been able to buy replacement parts.
The dissassembly guide is very enormous and detailed. Unlike on the Panasonic MS1 manual I downloaded here it actually looks like the real parts look. And the screws are labeled correctly, so you shouldn't have any left after the repair. ;)
;
has all the schematics you could need,and very well laid out format also has all part numbers along with an exploded view which is helpful
;
Very nice to have! Now it is no problem to understand how it is put together.
Helps me a lot.
;
good scans, all is clear. all pages in order. recommended
Pin No. 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100
Pin Name D0 VDD GND TI1 VIN VOUT TI2 TI3 TLD8 TCK TRP TD0 PD0 TI4 PDDIS MUTO TI5 VLDY DASYO DAOUT DAIN DASEL TI8 C2F1 C2F0 C1F1 C1F0 MUTI VDD GND AVDD CPIN CMIN AGND TM4 VDD DIN DOUT DOUTB C9M GND WINGT SYST0 SYST1 ADST0 ADST1 TM5 BUNRI AGND AVDD
I/O I/O � � I I O I I I I O O O I I O I O O O I I I O O O O I � � � I I � I � I O O O � O O O O O I I � � Data bus input/output with SRAM +5V power supply Ground Test pin (Connected to VDD) VCXO input (18.432MHz) VCXO output (18.432MHz) Test pin (Connected to Ground) Test pin (Connected to Ground) Test pin (Connected to Ground) Test pin (Connected to Ground) Test pin (Open) Test pin (Open) Output of internal phase comparator (3 state) Test pin (Connected to Ground) PDO output control input �L� : output ON Mute signal output �H� : mute Test pin (Connected to Ground) Test pin (Open) Test pin (Open)
Description
Digital-out signal output (Serial data stream output) Dgital external input Through out to DAOUT when DASEL is �H� (Not used)
Digital-out selection input (Not used) Test pin (Connected to Ground) C2 error correction state display Outputs if corrected properly (Not used) C2 error correction state display Outputs number of errors at C2 (Not used) C2 error correction state display Outputs whether error is present at C1 (Not used) C2 error correction state display Outputs number of errors at C1 (Not used) Muting input �H� mute +5V power supply Ground +5V power supply (Analog) Comparator input (+) (QPSK input) Comparator input (�) Ground (Analog) Test pin (Connected to ground) +5V power supply Test pin (Connected to ground) Comparate output Comparate inverted output 9.216MHz output (Open) Ground Test pin (Connected to ground) Test pin (Connected to ground) Test pin (Connected to ground) Test pin (Connected to ground) Test pin (Connected to ground) Test pin (Open) Test pin (Open) Ground (Analog) +5V power supply (Analog)
� 66 �
|
|
|
> |
|