Thank you for having the manual I needed for an older model Aiwa stero I had found on Ebay --- I wanted the Aiwa because I had tapes and cd's but I did not have a manual as to how to operate the system... I found what I needed and it has enabled me to set the system up for my enjoyment.
I wished detailed information of the JBL S310 and here I found it! Very happy with the service from this site!
Text excerpt from page 14 (click to view)
Plug and Play Feature
ENG
When the television is initially powered on, several basic customer settings proceed automatically and subsequently. The following settings are available.
1
English Ь� Hrvatski �eština Netherland Français
If the television is in Standby mode, press the Power ( ) button on the remote control. Result: The message Plug & Play is displayed. It flickers for a little while and then Language menu is automatically displayed.
2
Select the appropriate language by pressing the M or L button. Press the Menu button to enter the language. Result: The message Antenna input check is displayed.
�
3
If any language is not selected on the Language menu, the Language menu will disappear about 30 seconds later.
Make sure that the antenna is connected to the TV. Press the � or �¤button. Result: The ATM menu is displayed.
4 5
Select your country by pressing the � or � button. To search the channels, press the Result: button.
The channels are stored in an order which reflects their positions in the frequency range. Finally, the search will end automatically. When the channels have been stored, the Time menu is displayed with Clock is selected.
�
6
To stop the search before it has finished, press the Menu button.
Press the � or �¤button to move to the hour or minute. Set the hour or minute by pressing the M or L button.
�
7
Refer to �Setting and Displaying the Current Time� on page 34.
When you have finished, press the Menu button. Result: The message Enjoy viewing your new TV is displayed, and then the channel which has been stored will be activated.
