|
Who's Online
There currently are 5754 guests and 2 members online.
|
Categories
|
Information
|
Featured Product
|
|
|
|
|
There are currently no product reviews.
;
El producto satisface las necesidades del servicio t
;
This is a good quality scan of the Operation & Maintenance (Service) Manual for the PAL version of this high-band broadcast umatic, BVU-800P
All schematics and lineup procedures appear to be included in this one manual AFAICT.
The file size is just over 113 MB which gives an idea of the quality and number of pages.
All of the schematics, which contain some fairly small print, are easily readable when you zoom into the page.
John Thompson, Newcastle Upon Tyne, England.
;
Good quality, all schematics of few of models. There is also short form of user manual and regulation manual.
;
Perfect copy of the service manual. you can enlarge every page, and it comes up
with all details.
;
It´s very very nice manual with all, what i need. Original in good quality. Very fast business. Very much thanks...
CH 1 INPUT
1
2
3
4
5
1 INPUT VOL. (channel 1 input level) control Turning to the right increases the level of the sound output from the channel 1. 2 Pin plug input terminal Phono plug input terminal for channel 1. Connect to the output on a piece of audio equipment (etc.). 3 Standard plug input terminal Phone plug input terminal for channel 1. Connect to the output on a musical instrument (etc.). 4 Balanced input terminal Balanced input terminal for channel 1. Connect to the output terminal of a professional mixing console (etc.). 5 Balanced input terminal polarity switch Use to switch the polarity of the channel 1 balanced input terminal.
CH 2 INPUT
1
2
3
4
5
6
1 INPUT VOLUME. (channel 2 input level) control 2 Pin plug input terminal 3 Standard plug input terminal 4 DIRECT switch. (Only for Balanced input terminal) Setting this switch to DIRECT allows you to bypass the tone controls and send the sound from a mixer (etc.) directly to the speaker�s power amplifier. In this case, BASS and TREBLE adjustments are not possible. Only the MASTER VOL. and TW LEVEL can be adjusted. Note When the DIRECT switch is set to DIRECT, no sound will be output to the other speakers (if other speakers are connected). 5 Balanced input terminal 6 Balanced input terminal polarity switch
Speaker Connections and Placement
Placement
The speaker can be placed vertically or horizontally.
Connections
Be sure to set the POWER switch on the back panel to OFF before making any connections.
Balanced terminal polarity When the balanced input terminal polarity switch is set to 2HOT.
1:GND 2:HOT 3:COLD 2 3 1 2 3 1
When the balanced input terminal polarity switch is set to 3HOT.
1:GND 2:COLD 3:HOT
Balanced (XLR) cord phone plug cord Audio phono cord Connect only one.
To the output terminals of an electronic instrument, mixing console, computer, or audio device (etc.).
To a wall outlet
�4�
|
|
|
> |
|