Genuine Toshiba owner's manual. Couldn't really ask for more. And written in understandable English in contrast to a few recent experiences I have had with manuals for other equipment other than Toshiba but made in China and written in "Chinglish"!
I purchased a vintage Sony mixer off eBay and within the hour was able to locate and purchase the manual for it.I mean really,where else can you find a manual for a product made in 1983!? It was easy to find and purchase/download the manual I needed.I will use this site again for other equipment I have! Great site!
perfect! you just sent to me the copy in Italian witout even my specification!!!! so you are really smart cooperative and efficient. To my opinion the best place all over to get a manual of electronics!!!!
Text excerpt from page 13 (click to view)
Step 4
Tuning your TV to the VCR
If you have connected your VCR to the TV using the EURO-AV cable, skip this step. Make sure to match the COMMAND MODE of the VCR and the remote commander. This VCR and remote commander are set to VTR3 at the factory.
ON/STANDBY PROGRAM +/�
COMMAND RF-CH MODE
1 2
ON/STANDBY
Press ON/STANDBY to turn on the VCR.
Press RF-CH on the VCR.
RF-CH
The factory-preset RF channel appears in the display window. The VCR signal is output through this channel to the TV.
RF
3 4
Turn on your TV and select a programme position for the VCR picture. This channel will now be referred to as the video channel. Tune the TV to the same channel as that shown in the display window so that the picture on the right appears on the TV screen. Refer to your TV manual for tuning instructions. If the picture does not appear clearly, see �To obtain a clear picture from the VCR� on the next page.
