There are currently no product reviews.
I am so happy found this site as it consists of so many Manuls and easy to aquire. This onei s exactly what I wanted and much more as it has info on not only how to use the tuner but how to repair it as well. I will come here 1st before purchasing else where! Thanks owner-manual.com!
Top class product, I printed it out on A3 paper and it is clear and very easy to follow.
Cheaper than buying a new radio!
is part of the manual is very useful for repairing
Here are circuit diagrams
if there is damage, I recommend using this part of the
a complete list of circuit boards and components
This paper enable me, to bring this lovley Scope into Function.
Without this Page, i have no cance to make this finish.
Hans M. Knoll Germany
I used for first time this the wheat and am very thanked
2-4-6. Playback Level Check (MA-286 Board) Mode Playback Signal Alignment Measurement point Measuring instrument Specified value Alignment tape : SP mode color bar portion Video LINE OUT terminal Oscilloscope A=1.00 Â± 0.02Vp-p
2-5-1. ACE Head Adjustment Refer to the âVHS mechanical adjustment manual 11). 2-5-2. E-E Output Level Check Mode Signal Measurement point Measuring instrument Specified value
E-E 400Hz, â7.5dBs : IC540 pin 5 (2) CJ540 L/R Audio level meter â7.5 Â± 2dBs ( ) : R-ch
[Check Method] 1) Check that the playback level satisfies the specified value.
[Check Method] 1) Input signal of 400Hz and â7.5dBs to the CN540 pin 5 (2). 2) Check that the audio output level is â7.5 Â± 3dBs. 2-5-3. Overall Output Level and Distortion Factor Check Mode Self-record playback Signal Measurement point Measuring instrument Specified value 400Hz, â7.5dBs : IC540 pin 5 (2) IC540 pin 3 (1) Audio level meter and Distortion meter Playback Level: â6.3 Â± 3dBs Distortion: 4.0% or less ( ) : R-ch
Fig. 7-2-9. 2-4-7. VCO Frequency Adjustment (MA-286 Board) Mode Signal Measurement point Measuring instrument Adjustment element Specified value Playback Alignment tape : SP mode color bar portion IC500 pin @Â§ Digital voltmeter CT500 A=2.4 Â± 2.5Vdc
[Check Method] 1) Adjust CT500 until DC output level at IC 500 pin @Â§ (F. C) satifies the specification.
A 0V 1H
[Check Method] 1) Input signal of 400Hz and â7.5dBs to the audio input. 2) Record signal. 3) Playback the recorded portion. 4) Check that the output level is â6.3 Â± 3dBs. 5) Check that the distortion factor is 4.0% or less. 2-5-4. Overall Noise Level Check Mode Signal Measurement point Measuring instrument Specified value Self-record playback No signal (Insert a shorting plug into the Audio LINE IN terminal) IC540 pin 3 (1) Audio level meter (IHF-A weighing filter is used) â 45.5dBs or less ( ) : R-ch
Fig. 7-2-10 2-5. AUDIO SYSTEM ADJUSTMENT â¢ For the adjustment of the audio system, perform in the SP mode if there is no special notes. Use the alignment tape. [Connecting Instruments]
(CN540) Audio line OUTPUT L/R (CN540) Audio line INPUT L/R Audio oscillator 600â¦ Attenuator VTR 47kâ¦ Audio level meter or distortion meter
[Check Method] 1) Record. 2) Playback recorded portion. 3) Check that noise level is â 45.5dBs or less.
Fig. 7-2-10. â¢ Adjust in the SP mode if there is no special indications. â¢ Perform the adjustment setting the switch on the following positions. â¢ CHANNEL switch .................................................. LINE 1 [Adjustment Method] 1. ACE head adjustment.....Refer to the VHS mechanical adjustment manual . 2. E-E output level check 3. Overall Output level and distortion factor check 4. Overall noise level check.