|
Who's Online
There currently are 5575 guests online.
|
Categories
|
Information
|
Featured Product
|
|
|
|
|
There are currently no product reviews.
;
I am very happy with the owner's manual. I bought a used Casio and was so relieved that I was able to get a hold of a owner's manual. It was very easy to download the manual and I had no problems with printing it. Thank you! Nancy Whalen
;
The purchased manual is an high-quality scan of the original JVC paper-based Owner´s Manual. I am very satisfied!
;
Very satisfied with received document, all is right, Thank You very much, it was a Pleasure to work with You.
;
great site, the most easy and fastest way to find the manual you need, no 5 star because the manual was only available in german, but I speak german as well so no problem for me.
;
thanks for this download i got a pioneer bdp-lx70a blu-ray player and it had no manual i search everywhere on the internet and came across owner-manuals.com and i found that it was so easy to find and downloaded from this site if i ever need a manual again this would be the first place that i would come too thanks guys
� Audio DRC (Dynamic Range Control) Makes the sound clear when the volume is turned down when playing a DVD that conforms to �Audio DRC�. This affects the output from the following jacks: � OUT AUDIO L/R jacks � DIGITAL AUDIO OUT (OPTICAL or COAXIAL) jack only when �Dolby Digital� is set to �D-PCM�. The default setting is indicated in bold print.
Standard TV Mode Normally select this position. Makes the low sounds clear even if you turn the volume down.
� 48kHz/96kHz PCM Selects the sampling frequency of the audio signal. The default setting is indicated in bold print.
48kHz/16bit 96kHz/24bit The audio signals of DVD VIDEOs are always converted to 48 kHz/16 bit. All types of signals including 96 kHz/24 bit are output in their original format. However, if the signal is encrypted for copyright protection purposes, the signal is only output as 48 kHz/16 bit.
Notes � If you select the surround setting while playing a DVD, the player does not output the following signals from the DIGITAL AUDIO OUT (OPTICAL or COAXIAL) jack. � Dolby Digital signals (when you set �Dolby Digital� to �D-PCM� in �AUDIO SETUP� menu) � MPEG audio signals � If you connect a component that does not conform to the selected audio signal, a loud noise (or no sound) will come out from the speakers, affecting your ears or causing the speakers to be damaged. � Even if you set �48kHz/96kHz PCM� to �96kHz/24bit�, the sampling frequency is converted to 48 kHz/16 bit when a �SURROUND� mode (page 76) is selected. � The analog audio signals from AUDIO OUT L/R jacks are not affected by �48kHz/96kHz PCM� setting and keep their original sampling frequency level.
DVD Settings and Adjustments
Audio Setup
57
|
|
|
> |
|