There are currently no product reviews.
Best help everywhere i got from here. My audio medicinman was happy to get this manual from me. So he could repair my pioneer perfectly. Thanks
It was very usefull, it is clear the quality is super, the price I paid is very afordable.
Generally speaking Iam very happy with this company.
The manual was exactly what I needed, Good quality scans too. superb.
I am so happy found this site as it consists of so many Manuls and easy to aquire. This onei s exactly what I wanted and much more as it has info on not only how to use the tuner but how to repair it as well. I will come here 1st before purchasing else where! Thanks owner-manual.com!
Top class product, I printed it out on A3 paper and it is clear and very easy to follow.
Cheaper than buying a new radio!
HOW TO REPLACE A ROTARY UPPER DRUM
See below for note.
1) 2) 3)
HOW TO REMOVE A ROTARY UPPER DRUM
Remove screw 1 (+P3 Ã 8) and remove the ground shaft assembly 2. (Refer to Fig. 4.) Remove soldering which is marked by arrow and remove the rotary upper drum board completely. Remove two screws 3 (PSW3 Ã 8) and remove the rotary upper drum in the direction of A. (Refer to Fig. 5.) If removal is difficult, remove it while rotating it slowly.
HOW TO ATTACH A NEW ROTARY UPPER DRUM
Pay attention so that finger print or like must not be put when inserting a new upper drum into lower drum. Align mark of the rotary upper drum board with the mark of the rotary transformer board so that the screw hole on the upper drum and that on the lower drum are aligned. (Refer to Fig. 5.) If attaching is difficult, attach a upper drum while rotating it slowly.
Note: If removal is difficult, check again if soldering is removed completely.
2 Ground shaft assembly 1 Screw (+P3 Ã 8)
Note: Pay attention not to damage the video heads. Confirm that the upper drum is inserted completely. 4) 5) Tighten the two screws 3 (PSW3 Ã 8). (Refer to Fig. 5.) Fix the earth shaft 2 by tightening the screw 1 (+P3 Ã 8) so that protrusion at the tip of the earth shaft contacts the center of the drum shaft.
4 Plate spring
Drum when viewed from the top
Note: When attaching the ground shaft assembly 2, never give force to the plate spring 4.
3 PSW3 Ã 8
Upper drum assembly DZR-51-R (8-848-594-02) (998HF) DZR-45-R (8-848-576-02) (EXCEPT 998HF)
Align the two arrow marks.
Lower drum assembly DZL-51B/J-RP (8-848-666-11)
Note : There are two types of drum assembly built in models. [Discrimination]
UPPER DRUM ASSEMBLY DZR-51-R (998HF) (8-848-594-02) DZR-45-R (Except 998HF) (8-848-576-02)
DRUM ASSEMBLY DZH-96A-R (998HF) (8-839-046-02) DZH-94A/Z-RP (Except 998HF) (8-839-044-02)
There are two printed circuit boards on the top.
There is no printed circuit board.
Note: It cannot be divided to two parts, the upper and the lower drum assemblies.