Super Anleitung. Ordentliche Auflösung. Das ganze noch in Deutsch wäre zu schön. Alle Datenblätter sind sauber Kopiert und alle Leitungswege sind sauber ausgeführt
Thanks God for the internet and thanks for the service like this - proffessional solution on time.
Text excerpt from page 11 (click to view)
SAT-W60 SECTION 3 SYSTEM SELF TEST
SELF TEST:
1. From home page go to [settings]. 2. Go to [system test]. a. Connect a phone line to the phone jack on the back of the unit. b. Connect both tuners to a SAT signal. c. Make sure that the CAM card is in. 3. Press [Run Test]. This test checks both tuner's signal and that the modem detects a dial tone. Also, it checks that the CAM card is inserted and valid. Test will show the serial number on the card. 4. Go to [Receiver Info] from the same system test menu. This provides the following information on the box: � Manufacturer: Sony Model number: � Serial number: � Client software: � Boot rom version: � SSID: 5. To show the date the box was last upgraded along with the version, select [Upgrades] from the SAT receiver information menu. 6. Go to the settings menu and select [Hooking Up] 7. Go to [Signal Strength] This will show the signal strength for each tuner. It is also possible to change transponder numbers to verify both even and odd transponders.