Thank you for having the manual I needed for an older model Aiwa stero I had found on Ebay --- I wanted the Aiwa because I had tapes and cd's but I did not have a manual as to how to operate the system... I found what I needed and it has enabled me to set the system up for my enjoyment.
I wished detailed information of the JBL S310 and here I found it! Very happy with the service from this site!
Text excerpt from page 30 (click to view)
Changing the name of the remote (component) (continued)
2 Touch the remote (component) you
want to change the name (�VIDEO1� for example).
Adjusting the commander�s operating environment
The RM SETUP screen allow you to adjust various settings and customize the commander�s operating environment.
Or, turn the jog dial to select the remote (component), then press the jog dial to enter the selection. The screen for operating the component appears.
1 Touch RM SETUP.
The RM SETUP screen appears.
3 Touch
.
The pull down menu appears.
Current setting
2 Touch the menu you want to adjust.
See below for details about each menu.
3 Touch EXIT to return to the RM SETUP
screen.
4 Touch NAME EDIT in the pull-down
menu.
The RM NAME EDIT screen appears.
Current name display Name input display
x Adjusting the contrast of the display (CONTRAST)
You can adjust the contrast of the display. Touch + or � to adjust the contrast.
Tips
Name input buttons
� Depending on the brightness of the room and the angle at which the commander is viewed, the LCD may be difficult to see. When this occurs, changing the angle of the commander or adjusting the contrast of the LCD may make the LCD easier to see. When fingerprints (etc.) get on the LCD, wipe the LCD with a soft, dry cloth. It is recommended to use the touch pen supplied with the commander. � The contrast lightens a little when the temperature lowers, and darkens a little when the temperature rises.
5 Enter the name you want. 6 Touch SET.
The new name is set in the commander.
