Very clear scan, I recommend it. Definitely a must have for any 3362 owner.
Alpine could have written a slightly more complete manual, though. It's already pretty huge, but the unit has so many functions, I feel some more explanation would have been better.
Yamaha's manual of their comparable YDSP-1 is a little better in my opinion.
Correct manual received and of good quality but the contents of the file for the Service Manual for the same monitor is for a 20" TV not the RGB Monitor.
Text excerpt from page 17 (click to view)
Presetting radio stations
You can store radio stations into the playerâs memory. You can preset up to 20 radio stations, 10 for each band.
BAND DISPLAY ENTER MEMORY PRESET +, â
1 2 3
Press BAND until the band you want appears in the display. Hold down BAND for about 2 seconds until âAUTOâ appears in the display. Press DISPLAYâ¢ENTER MEMORY. The stations are stored in memory from the lower frequencies to the higher ones.
On the player 1 Press BAND to select the band. 2 Set the frequency to the station you want. 3 Hold down DISPLAYâ¢ENTER MEMORY for 2 seconds. 4 Press PRESET+ or â until the preset number (1 to 10) you want for the station flashes in the music calendar. 5 Press DISPLAYâ¢ ENTER MEMORY again.
If a station cannot be preset automatically You need to preset a station with a weak signal manually. Also, when you want to replace a preset station with a new one, proceed as follows: Use the remote. 1 Press BAND until the band you want appears in the display. 2 Set the frequency to the station you want. 3 Hold down the number buttons that you want to preset the new station for 2 seconds. The new station replaces the old one.