There are currently no product reviews.
Manual was complete and available promptly, since I had lost my original manual. Very good response.
Whilst this is a photo copy, and some of the pages are a little askew, it was all readable and intact. A real bonus finding an old manual for a classic piece of kit that no other site had.
excellent quality, contains circuits and scan quality, 110 pages
It was easy done, and I got exactly what I was looking for.
The manuel was exactly what I needed and I received it promptly. Thanks
While observing the level meter in the display, adjust the recording level by pressing <MENU,. Set the level so that the level meter reaches around (â12 dB) mark above the display window. If the sound is too high, lower the recording level until the level meter just barely reaches the (OVER) mark above the display window.
Volume decreases < increases ,
Recording does not start in this step. If your source is an externally connected component, be sure to cue the source to the beginning of the material to be recorded before you start playback.
Press X again to start recording.
To stop recording, press x.
The recording level control is switched back to automatic control when you record the next time.
â¢ The recording level cannot be adjusted while recording is in progress. If you want to adjust the recording level after you have started the recording, press X to pause the recorder. Then do the procedure from step 5. â¢ You cannot adjust the recording level manually during synchro-recording.