|
Who's Online
There currently are 6023 guests online.
|
Categories
|
Information
|
Featured Product
|
|
|
|
|
There are currently no product reviews.
;
It is perfect, exactly what we needed. It's like the paper version but less clutter.
;
Received my manual within 24 hours. Very clear scan of the manual I needed. Thanks!
;
Very clear scan, I recommend it. Definitely a must have for any 3362 owner.
Alpine could have written a slightly more complete manual, though. It's already pretty huge, but the unit has so many functions, I feel some more explanation would have been better.
Yamaha's manual of their comparable YDSP-1 is a little better in my opinion.
;
Immediate response with excellent service - highly reccommended
;
Correct manual received and of good quality but the contents of the file for the Service Manual for the same monitor is for a 20" TV not the RGB Monitor.
1
Slide SYNCHRO REC to ON. �SYNC� appears in the display.
Recording from a microphone
Connect a stereo microphone (ECM-717, ECM-MS907, ECM-MS957, etc.; not supplied) to the MIC (PLUG IN POWER) jack.
001
2 3
Press and slide REC upward. The recorder stands by for recording. Play the source sound. The recorder starts recording when it receives the playing sound.
Stereo microphone
To stop recording, press p. Notes
�You cannot pause manually during synchro-recording. �When there is no sound from the player for more than 3 seconds during synchrorecording, the recorder goes into the standby mode automatically. When the sound comes from the player again, the recorder resumes synchro-recording. If the recorder is kept in the standby mode for 5 minutes or longer, the recorder stops automatically. �Do not switch SYNCHRO REC after step 2. Recording may not be done properly. �Even when there is no recorded sound on the sound source, there may be cases when recording does not pause automatically during synchro-recording due to the noise level emitted from the sound source.
to MIC (PLUG IN POWER)
1
Insert a recordable MD and start recording. Press and slide REC upward. �REC� lights up and recording starts. For other operations, see �Recording an MD right away! � (page 6).
z
When recording in monaural, follow steps 1 and 2 of �Recording in monaural for double the normal recording time� (page 13) before synchro-recording.
To stop recording, press p. Notes
�When recording sources with large sound, adjust recording manually to prevent distortion (see �Adjusting the recording level manually�, page 13). �You cannot record through the microphone while an optical cable is connected to the (OPTICAL) LINE IN jack. The recorder automatically switches input in the following order; optical input, microphone input, and analog input. �The microphone may pick up the operating sound of the recorder itself. Use the microphone away from the recorder in such cases.
12
$4.99 MZR37SP SONY Service Manual Complete service manual in digital format (PDF File). Service manuals usually contains circuit diagr…
|
|
|
> |
|