|
|
|
Who's Online
There currently are 6043 guests online. |
|
Categories
|
|
Information
|
|
Featured Product
|
|
|
 |
|
|
There are currently no product reviews.
 ;
Dear Sirs,
Thank you for the fast support, the manual does provide all necessary information to repair the radio. All schematics are in a good quality for reading.
The manual fits 100% to my requirements as a technican.
Kind regards Thomas
;
the big video recorder format s-vhs many features delicate in loading system of the cassette. Such machines are no longer manufactured, it would be too expensive.
 ;
THIS MANUAL IS VERY GOOD AND VERY CLEAR
PLEASE NOTE IT DOES NOT CONTAIN THE SETUP INFORMATION TO ALIGHN THE GEARS IN THE CD MECH IT DOES SHOW ALL THE PARTS AND THEIR LOCATIONS .
;
Complete service and operation manual. All schematics are there, all circuit boards AND add-on boards. Including exploded views ,component names and specifications. Also electrical and mechanical adjustment procedures are in this manual. This manual also covers the more advanced BR-S811E unit. Scan quality is fair and usable.
;
High quality scan of original Service Manual. Everything´s fine!
MZ-M100
Example of Calculation:
Result Item No. 0211 0212 0213 0214 0215 0216 Parameter Pr_nominal 2.48 mW Decimal 50 30 147 40 38 116 Hexadecimal 32h 1Eh 93h 28h 26h 74h
Kr �0.3 %/°C Pw_nominal 7.35 mW Kw �0.4 %/°C Prmin Pwmin 1.9 mW 5.8 mW
3-5-3. Other setting Procedure: 1. Enter the test mode (Display Check mode). 2. Press the [VOL+] key to enter the Manual mode. 3. Press the [VOL+] key once and press the > key five time to select the item number 1113 and display as follows.
Display of the remote commander
113 SS**$$##
adjustment value (hexadecimal)
Procedure: 1. Enter the test mode (Display Check mode). 2. Press the [VOL+] key to enter the Manual mode. 3. Press the > key once, press the [VOL+] key once, and press the > key once again to display as follows.
Display of the remote commander
210 DiscPr
4. Press the > key once to select the item number 0211. 5. Adjust with [VOL+]/[VOL--] keys so that the adjustment value of LCD becomes calculated value. 6. Press the X key on the set or � key on the remote commander to write the adjusted value. 7. Press the > key to next item. 8. Repeat adjustment from step 4 until item number 0216. 3-5-2. Destination setting Procedure: 1. Enter the test mode (Display Check mode). 2. Press the [VOL+] key to enter the Manual mode. 3. Press the > key five time to select the item number 0113 and display as follows.
Display of the remote commander
113 DistFL **
adjustment value (hexadecimal)
4. Adjust with [VOL+]/[VOL--] keys so that the adjustment value of �**� on the LCD becomes �1A�. 5. Press the X key on the set or � key on the remote commander to write the adjusted value. ($$ blinks and disc mark rotates on the LCD) 6. Adjust with [VOL+]/[VOL--] keys so that the adjustment value of �$$�on the LCD becomes �20�. 7. Press the X key on the set or � key on the remote commander to write the adjusted value. (## blinks and disc mark rotates on the LCD) 8. Adjust with [VOL+]/[VOL--] keys so that the adjustment value of �##�on the LCD becomes �94�. 9. Press the X key on the set or � key on the remote commander to write the adjusted value. 10. Press the [VOL+] key once to change the adjustment value of �**� on the LCD into �1B�. 11. Press the X key on the set or � key on the remote commander to write the adjusted value. ($$ blinks and disc mark rotates on the LCD) 12. Adjust with [VOL+]/[VOL--] keys so that the adjustment value of �$$�on the LCD becomes �F1�. 13. Press the X key on the set or � key on the remote commander to write the adjusted value. (## blinks and disc mark rotates on the LCD) 14. Adjust with [VOL+]/[VOL--] keys so that the adjustment value of �##�on the LCD becomes �1A�. 15. Press the X key on the set or � key on the remote commander to write the adjusted value. 16. Press the x key four times and back to the Display Check mode.
4. Press the [VOL+]/[VOL--] key and set the adjustment value of �**� on the LCD becomes �20�. 5. Press the X key on the set or � key on the remote commander to write the adjusted value. 6. Press the > key to select the item number 0114. 7. Press the [VOL+]/[VOL--] key and set the adjustment value of the LCD becomes �80�. 8. Press the X key on the set or � key on the remote commander to write the adjusted value. 9. Press the x key four times and back to the Display Check mode.
19
|
|
|
> |
|
