|
|
|
Who's Online
There currently are 6043 guests online. |
|
Categories
|
|
Information
|
|
Featured Product
|
|
|
 |
|
|
There are currently no product reviews.
 ;
This is a good quality scan of the Operation & Maintenance (Service) Manual for the PAL version of this high-band broadcast umatic, BVU-800P
All schematics and lineup procedures appear to be included in this one manual AFAICT.
The file size is just over 113 MB which gives an idea of the quality and number of pages.
All of the schematics, which contain some fairly small print, are easily readable when you zoom into the page.
John Thompson, Newcastle Upon Tyne, England.
;
Good quality, all schematics of few of models. There is also short form of user manual and regulation manual.
;
Perfect copy of the service manual. you can enlarge every page, and it comes up
with all details.
;
It´s very very nice manual with all, what i need. Original in good quality. Very fast business. Very much thanks...
;
Purchased the manual that I was looking for at a great price and could download it easily.. Great service experience and for future purchases I plan to use the site.
Thank you very much
MXD-D40
9. Press the [YES] button to display �EFB = MO-P�. Then, the optical pick-up moves to the pit area automatically and servo is imposed. 10. Observe the waveform of the oscilloscope, and check that the specified value is satisfied. Do not turn the [ l AMS L] (MD) knob.
Traverse Waveform
A VC B Specified value : Below 10% offset value Offset value (%) = IA � BI X 100 2 (A + B)
11. Press the [YES] button to display �EF MO CHECK (C14)�. The disc stops rotating automatically. 12. Press the [ A EJECT] button and take out the disc. 13. Load the check disc (MD) TDYS-1. 14. Turn the [ l AMS L ] (MD) knob and display �EF CD CHECK� (C15). 15. Press the [YES] button to display �EFB = CD�. Servo is imposed automatically. 16. Observe the waveform of the oscilloscope, and check that the specified value is satisfied. Do not turn the [l AMS L ] (MD) knob.
Traverse Waveform
A VC B Specified value : Below 10% offset value Offset value (%) = IA � BI X 100 2 (A + B)
6-7. Focus Bias Check Change the focus bias and check the focus tolerance amount. Checking Procedure: 1. Load the test disk (MDW-74/GA-1). 2. Turn the [ l AMS L ] (MD) knob to display �CPLAY2 MODE� (C36). 3. Press the [YES] button to display �CPLAY2MID�. 4. Press the [MENU/NO] button when �C = AD = � is displayed. 5. Turn the [ l AMS L ] (MD) knob to display �FBIAS CHECK� (C16). 6. Press the [YES] button to display � / c = �. The first four digits indicate the C1 error rate, the two digits after [/] indicate ADER, and the 2 digits after [c =] indicate the focus bias value. Check that the C1 error is below 20 and ADER is below 2. 7. Press the [YES] button to display � / b = �. Check that the C1 error is about 100 and ADER is below 2. 8. Press the [YES] button to display � / a = �. Check that the C1 error is about 100 and ADER is below 2. 9. Press the [MENU/NO] button, then press the [ A EJECT] button and take out the test disc. 6-8. C PLAY Check MO Error Rate Check Checking Procedure: 1. Load the test disk (MDW-74/GA-1). 2. Turn the [ l AMS L ] (MD) knob to display �CPLAY2 MODE� (C36). 3. Press the [YES] button to display �CPLAY2MID�. 4. The display changes to �C = AD = �. 5. If the C1 error rate is below 20, check that ADER is 00. 6. Press the [MENU/NO] button to stop playback, then press the [ A EJECT] button and take out the test disc. CD Error Rate Check Checking Procedure: 1. Load the check disc (MD) TDYS-1. 2. Turn the [ l AMS L ] (MD) knob to display �CPLAY2 MODE� (C36). 3. Press the [YES] button to display �CPLAY2MID�. 4. The display changes to �C = AD = �. 5. Check that the C1 error rate is below 20. 6. Press the [MENU/NO] button to stop playback, then press the [ A EJECT] button and take out the check disc. 6-9. Self-Recording/playback Check Prepare a continuous recording disc using the unit to be repaired and check the error rate. Checking Procedure: 1. Load a recordable disc (blank disc). 2. Turn the [ l AMS L ] (MD) knob to display �CREC 2MODE� (C37). 3. Press the [YES] button to display �CREC 2MID�. 4. When recording starts, lights up � REC � and display �CREC 2 @@@@� (@@@@ is the address). 5. About 1 minute later, press the [MENU/NO] button to stop continuous recording. 6. Turn the [ l AMS L ] (MD) knob to display �CPLAY2 MODE� (C36). 7. Press the [YES] button to display �CPLAY2MID�. 8. �C = AD = � will be displayed. 9. Check that the C1 error becomes below 20 and the AD error below 2. 10. Press the [MENU/NO] button to stop playback, then press the [ A EJECT] button and take out the disc.
17. Press the [YES] button to display �EF CD CHECK� (C15). 18. Press the [A EJECT] button and take out the check disc (MD) TDYS-1. Check Location: BD (MD) board (see page 44)
39
 $4.99 MXD-D40 SONY
Owner's Manual Complete owner's manual in digital format. The manual will be available for download as PDF file aft…
|
|
|
> |
|
