|
|
|
Who's Online
There currently are 5826 guests online. |
|
Categories
|
|
Information
|
|
Featured Product
|
|
|
 |
|
|
There are currently no product reviews.
 ;
It is perfect, exactly what we needed. It's like the paper version but less clutter.
 ;
Received my manual within 24 hours. Very clear scan of the manual I needed. Thanks!
;
Very clear scan, I recommend it. Definitely a must have for any 3362 owner.
Alpine could have written a slightly more complete manual, though. It's already pretty huge, but the unit has so many functions, I feel some more explanation would have been better.
Yamaha's manual of their comparable YDSP-1 is a little better in my opinion.
;
Immediate response with excellent service - highly reccommended
;
Correct manual received and of good quality but the contents of the file for the Service Manual for the same monitor is for a 20" TV not the RGB Monitor.
Recording images
Recording
(1) Press STANDBY. The STANDBY lamp lights up.
MODE SELECT PLAY STANDBY
(2) Start playing back the source to be recorded. The image from the TV or video equipment appears on the LCD screen. (3) Press MEMORY when you want to record. The captured image becomes still. [MEMORY] appears on the LCD screen and the MEMORY lamp lights up.
MEMORY lamp
REC
MEMORY
(4) Press REC. The captured image is recorded on the floppy disk. During recording, the REC lamp flashes, �RECORDING� appears and the remaining disk capacity indicator appears on the LCD screen.
REC lamp
MEMORY
REC
Note When the REC lamp is flashing, be sure not to shake or strike the unit. Do not press the floppy disk eject button, turn off the power or disconnect the power source.
If you don�t want to record the captured image in step 3
Press MEMORY again. [MEMORY] disappears and the image being played back appears on the LCD screen.
If the captured image is blurred in step 3
Press FIELD/FRAME repeatedly until [FIELD] appears. Then press REC (step 4). Normally record in the [FRAME] mode so that you can record fine images. To select the [FRAME] mode, press FIELD/FRAME repeatedly until [FRAME] appears.
12-EN
|
|
|
> |
|
