The manual was complete and extremely helpful in both diagnosing the problem I was having as well as fixing it. Excellent quality. I will getting additional manuals in the future.
Je suis audiophile belge, électronicien et créateur d'enceintes acoustiques.
J'ai apprécié la qualité des documents fournis. Ils sont très lisibles, ils peuvent être agrandis sans problème et ils sont complets. Pour moi, c'est parfait. Pour cette qualité, je suis d'accord de payer. Et le système de paiement et d'envoi est simple. Merci, continuez comme cela.
Frédéric
Text excerpt from page 3 (click to view)
MDR-7505
1-3. HUNGER (L)
2 Cushion stopper (upper)
Precaution during installation
Adjust the distance between the slider holder and harness to the specified distance as shown. Slider holder (L side)
4
1 Two screws (+P2 � 6)
0 � 2 mm 5
3 Cushion stopper (lower) (L)
Precaution during installation
4 Claw 5 Slider Route the harness into the groove and the rib of the portion A as shown.
3 Slider cap (L) 7 Harness 9 Slider cap lid (L) A
6 2 Two screws (+P2 � 6) 1 Two screws (+P2 � 6)
Precaution during installation
8 Place the hunger in the direction as shown and route the harness coming from the slider cap lid through the hole of the portion B on the Ginbal.
2 Ginbal (L) Route the harness into the groove inside the portion C.