There are currently no product reviews.
Rapid and precise delivery. Good print. On the spot.
available for me the service manual is in order!
This is exactly the thing you need to service this box. The manual is complete and the quality of the scan is good. I recommend this!
The delivery of this manual was very fast, less than 8 hours. The manual is very clear and concise, and helped a great deal in the repair and final setup of the Hitachi HMA-G2 Amplifier.
Great service. The manual was exactly what I was looking for: schematic + layout. I managed to fix the player. Highly recommended!
6 Loosen three screws on the spindle motor.
Loosen the screw about a turn from the state of being tight.
Feed base block assembly
Insert a eccentric screwdriver to either one of the hole for adjustment.
Jig terminal Mode Oscilloscope Phase difference Before adjustment
: E, F : TRACKING, SLED OFF : X/Y Lissajous's range (Each 20 mV/div.) : 1 : 3 or more 1
Fig. 7-4. 7 Again, plate the CD (YEDS-18) in the playback status. 8 Connect the oscilloscope to the terminals E and F of MD adjustment cable, and turn off the SLED and TRACKING switches. 9 Insert a eccentric screwdriver into the feed base block assembly for RD adjustment. !Âº After adjustment, turn on the SLED and TRACKING switches. !Â¡ Remove the CD (YEDS-18), and tighten three screws on the spindle motor, then three screws on the feed base block assembly.
3 or more
Make the figure straight. After adjustment
3 or more
Complete owner's manual in digital format. The manual will be available for download as PDF file aft…