There are currently no product reviews.
the Manual was made available as promised, the scans were excellent..Good Work !!!
It's complete and helpful manual with good quality of scan. Thanks very much.
The service was quick and simple, finding the service manual easy and it appears to be the original with colour schematics. It contained the info I was after and so sorted the problem.
I have copied it to CD and attached the envelope to the inside back cover of the owners manual. Good manual and excelent service. Robin Wood, Wood Electronics, New Zealand.
Exactly what was needed to assess the product - excellent value and great service
Nice to have the service manual for the Sony DCR-TRV345E now. The document is of excellent quality.
SECTION 3 MECHANICAL ADJUSTMENTS
1. Clean the following parts with a denatured-alcohol-moistened swab : record/playback/erase head pinch roller rubber belts capstan 2. Demagnetize the record/playback/erase head with a head demagnetizer. (Do not bring the head demagnetizer close to the erase head.) 3. Do not use a magnetized screwdriver for the adjustments. 4. The adjustments should be performed with the rated power supply voltage unless otherwise noted. Power supply voltage : 3 Vdc TAPE SPEED switch : 2.4cm Torque Measurement Mode Forward Torque Meter CQ-102M Meter Reading 5 to 10 g â¢ cm (0.07 to 0.140 oz â¢ inch) 5 to 10 g â¢ cm (0.07 to 0.140 oz â¢ inch) more than 30 g â¢ cm Fast Forward Rewind CQ-201M CQ-201M (more than 0.42 oz â¢ inch) more than 30 g â¢ cm (more than 0.42 oz â¢ inch)
SECTION 4 ELECTRICAL ADJUSTMENTS
Test Tape Type Signal Used for Tape Speed (cm/s) 2.4 1.2/2.4
S-2-A030A 3 kHz, â 20 dB Head Azimuth Adjustment WS-24 3 kHz, â 10 dB Tape Speed Adjustment
Record/Playback/Erase Head Azimuth Adjustment
Setting: VOL control : mechanical mid TAPE SPEED switch : 2.4cm/s VOR switch : OFF FAST PB switch : OFF Procedure: 1. Mode : Playback
test tape S-2-A030A (3 kHz, â20 dB) 16 â¦ set EAR jack (J101)
Tape Tension Measurement Mode Forward Reverse Tension Meter CQ-403M CQ-403MR Meter Reading more than 25 g (more than 0.35 oz) more than 25 g (more than 0.35 oz)
2. Turn the adjustment screw to obtain the maximum reading on level meter. Note: Several peaks may appear, but the maximum. Adjustment Location : First remove the cover (AZ).
Remove the cover (AZ)
Head azimuth adjustment screw (FWD)
Complete owner's manual in digital format. The manual will be available for download as PDF file aft…