|
|
|
Who's Online
There currently are 5992 guests online. |
|
Categories
|
|
Information
|
|
Featured Product
|
|
|
 |
|
|
There are currently no product reviews.
 ;
I needed the manual immediately and I got it immediately. I couldn't find this manual anywhere else on the net. The site was easy to traverse, and the price was very reasonable. I'll definitely be back for any future needs.
 ;
I received a good service manual, with good resolution. Improve the instructions for the purchase because they are not well understood.
For the rest, so good.
Thanks Angel.
;
Very good documentation for the Grundig 2077 model (as well as similar 800/900/1000 series radios). The first two pages are a summary of reception specifications and output capability. The third page is the tuner dial indicator and dial cord routing diagram. the final ~5 pages are the schematics for the various models (including 2077). The scan quality of the schematics are good, adn can be easily read if zoomed in. The documents are in German, not English as stated. It would have been nice to have the tuning sequence and settings, and some trouble shooting materials... or component and wiring map.
;
Perfect like it was descriped, Perfect like it was descriped
;
Very good detail, all pages clear, exactly what I needed
6. 1. 2. 3.
Power ON Procedure for Adjustment Connect an extension cable to the adjusting remote commander. Set the [PC] or [VIDEO] mode on the set. After making sure that the HOLD switch on the adjusting remote commander is not turned on (not at left (NOR) position), supply 8.4 Vdc to the DC IN 8.4 V jack (J701). (With the HOLD switch at HOLD position, the initial operation of the set does not finish, disabling the POWER switch function.) 4. Turn ON the POWER switch on the set. Confirm that a green LED lights up. 5. Set the HOLD switch on the adjusting remote commander to the HOLD (right (ADJ)) position. 7. Adjustment Finishing Procedure
Order (1) (2) (3) Page E or F 0 01 00 Address Data Description Check if adjusted data are written correctly to the given page and address. Set data 00 to given page and address. Page E or F: Write protect Remarks
Set HOLD switch on the adjusting remote commander to NOR position.
8. Password Reset (for operation check of the set) 1. Turn the POWER switch on, then press the �Password Reset� at the bottom of Power Box to reset the password set by the customer. 2. Operating the PUSH DISPLAY dial, select �No� on the Password Set screen to set �disuse of password�. Or,
Order (1) (2) (3) Page 0 F Address 01 8A Data 01 01 Description Set data 01 to given page and address. Set data 01 to given page and address and press PAUSE. Remarks Page E or F: Cancel protect Set disuse of password
After all adjustments and operation check finished, turn the POWER switch on, press the "Password Reset" at the bottom of Power Box, and turn the POWER switch off.
9. 1. 2. 3.
4. 5. 6. 7.
Picture and sound standard setting Set the [PC] mode. Press the MENU button to display menu. Operate the PUSH DISPLAY dial to set picture and sound as below. (1) Set the RESET. (2) AVLS: OFF (3) MEGA BASS: 0 (4) POWER SAVE: OFF Set the [VIDEO] mode. Press the MENU button to display menu. Set the RESET. Set the dials and switch as below. (1) BRIGHT dial: center (2) VOL dial: Between 3 and 6. (3) SCREEN switch: ON (4) SEE THROUGH: CLOSE completely (5) PC/VIDEO: [PC] mode
3-18
|
|
|
> |
|
