There are currently no product reviews.
Fast Download,all pages present,an excellent copy.THis enabled to find the origional part numbers and chase them up. The cartridge is proving difficult to find but at least I know the origional part number.Thanks to all.
The manual was as described. Complete with parts list and technical information. Fast delivery.
Simple and fast...
The diagrams are clear and legible; i have been a great help.
The site is very reliable and precise thanks.
Very easy site. Great service and quick release for download. Manuals are of good quality.
Joop - The Netherlands
Very good manual, in depth and complete. Only criticism is that some of the circuit diagrams are slightly blurry and hard to follow for long periods of time, but this is to be expected. Perfect for any maintenance required. Also contains the wiring diagrams of the control cable for constructing extensions.
2-12. PICTURE TUBE REMOVAL
NOTE: The picture tube for New Zealand model are upside-down, and the position for the anode-cap and tension spring is changed accordingly.
â¢REMOVAL OF ANODE-CAP
NOTE : After removing the anode, short circuit the anode of the picture tube and the anode cap to the metal chassis, CRT shield or carbon paint on the CRT.
!Â£ Four DGC clip !â Demagnetic coil !â¢ Four claws
8 Chassis assy !Âª Two screws (+P 3 Ã 12) 1 Two screws (washer head) (+P 4 Ã 16) 9 C board !Âº Neck assy !Â¡ Deflection yoke 3 Speaker (15 Ã 6.5cm) !Â¶ Two screws (Tapping) 2 Speaker (5cm)
1 Turn up one side of the rubber cap in the direction indicated by the arrow a.
!Â¢ DGC band !Â§ Tension spring !Â¶ Two screws (Tapping) 4 Two screws (washer head) @Âº Two screws (+P 4 Ã 16) (+P 3 Ã 12)
2 Using a thumb pull up the rubber cap firmly in the direction indicated by the arrow b.
7 Anode cap
3 When one side of the rubber cap is separated from the anode button, the anode-cap can be removed by turning up the rubber cap and pulling it up in the direction of the arrow c.
6 Speaker (15 Ã 6.5cm) 5 Speaker (5cm) Cushion
HOW TO HANDLE AN ANODE-CAP
1 Do not damage the surface of anode-caps with sharp shaped objects. 2 Do not press the rubber too hard so as not to damage the inside of anode-cap. A metal fitting called the shatter-hook terminal is built into the rubber. 3 Do not turn the foot of rubber over too hard. The shatter-hook terminal will stick out or damage the rubber.
!â¢ Picture tube