There are currently no product reviews.
Manual-link came 30 minutes after having paid for an extremely rare (40 years old) item (sony icr-120) and helped me to get the radio rework again. So really good help for me, fast and reliable delivery and -taken that into consideration- a very reasonable price for that service. So thanks again! Mike, Germany
Some of the pictures in this manual are a bit irritating. I had to dissassemble the unit and some of the screws have different threads, which is not mentioned in this manual. Also some of the drawings of the boards look different than the actual boards.
After all, the manual was very useful. I was able to recalibrate the capstan drive and it is working fine again.
This manual is very good. 303 pages scanned in a very high resolution. My camera has bad, leaking capacitors which all of the V5000 models are suffering from these days.
There is a huge part list with all capacitors, transistors etc. in this manual which helped me a lot. Otherwise I would not have been able to buy replacement parts.
The dissassembly guide is very enormous and detailed. Unlike on the Panasonic MS1 manual I downloaded here it actually looks like the real parts look. And the screws are labeled correctly, so you shouldn't have any left after the repair. ;)
has all the schematics you could need,and very well laid out format also has all part numbers along with an exploded view which is helpful
Very nice to have! Now it is no problem to understand how it is put together.
Helps me a lot.
The operating instruction mentioned here are partial abstracts
A Getting Started
GENERAL Operating Instruction Manual remain as in the manual.
Insert the batteries (supplied) into the remote.
Note â¢ Do not use old batteries nor use different types of batteries together.
Pull the power cord out by the plug. Do not pull the power cord itself. Even if your TV is turned off, it is still connected to the AC power source (mains) as long as the power cord is plugged in. Unplug the TV before moving it or if you are not going to use it for several days.
Do not plug in too many appliances to the same power socket. Do not damage the power cord.
â¢ Dangerously high voltages are present inside the TV. â¢ TV operating voltage: 220 â 240 V AC. â¢ Do not plug in the power cord until you have completed making all other connections; otherwise a minimum leakage current might flow through the antenna and other terminals to ground. â¢ To avoid battery leakage and damage to the remote, remove the batteries from the remote if you are not going to use it for several days. If any liquid that leaks from the batteries touches you, immediately wash it away with water.
For your own safety, do not touch any part of the TV, the power cord and the antenna cable during lightning storms.
To prevent fire or shock hazard, do not expose the TV to rain or moisture.
Do not block the ventilation openings of the TV. Do not install the TV in a confined space, such as a bookcase or built-in cabinet.
from the Operating Instruction Manual. The page numbers of
Do not open the cabinet and the rear cover of the TV as high voltages and other hazards are present inside the TV. Refer servicing and disposal of the TV to qualified personnel.
Connect the antenna cable (not supplied) to 8 at the rear of the TV.
Tip â¢ You can also connect your TV to other optional components. (See E)
Do not install the TV in an unstable position. Use a proper TV stand.
Do not place any objects on the TV.
C Securing the TV
B KV-PG21P10 only
To prevent the TV from falling, use the supplied screws, clamps and band to secure the TV.
20 mm screws 3.8 mm clamps band
Plug in the power cord, then press ! on the TV to turn it on.
Press SELECT and PROGR + on the TV at the same time for one to two seconds to preset the channels automatically. (See J)
Tip â¢ To stop the automatic channel presetting, press SELECT twice.
Screw the band to the TV stand and to the provided hole at the rear of your TV.
(1) Put a cord or chain through the clamps. (2) Screw one clamp to a wall or pillar and the other clamp to the provided hole at the rear of your TV.
Press SELECT on the remote until âLANGUAGE/ : ENGLISHâ appears on the screen, then press + or â to change the on-screen display language.
Note â¢ Use only the supplied screws. Use of other screws may damage the TV.
D TV front and rear panels
TV rear panel
TV front panel
For childrenâs safety, do not leave children alone with the TV. Do not allow children to climb onto it.
Do not operate the TV if any liquid or solid object falls into it. Have it checked immediately by qualified personnel only.
Function Turn off completely or turn on the TV. Remote control sensor. Standby indicator. Wake Up indicator. Select program number. Adjust volume. Select TV or video input. Select the desired item. Earphone terminal. Video input terminal. Antenna terminal. Monitor output terminal.
Clean the TV with a dry and soft cloth. Do not use benzine, thinner, or any other chemicals to clean the TV. Do not scratch the picture tube.
2 31 3 4 PROGR +/â 5 2 +/â * 6t 7 SELECT 8 9, qa t 08 qs T
* You can also use the 2 +/â buttons on the TV to work as the +/â buttons on the remote.
Your TV is recommended for home use only. Do not use the TV in any vehicle or where it may be subject to excessive dust, heat, moisture or vibrations.