|
Who's Online
There currently are 5880 guests online.
|
Categories
|
Information
|
Featured Product
|
|
|
|
|
There are currently no product reviews.
;
I ordered this manual sometime in the afternoon and I received it on my e-mail the same evening.
This is a fantastically good and properly scanned copy of the original manual. All pages are of the same scale and they overlap each other. It means that you can print the manual and easily make it as a convenient paper manual.
The content of the manual is fantastic. Alignment descriptions, PCB layouts and elementary diagrams are explicit and precise. I immediately found what I was looking for. Thanks to this manual and Owner-Manuals.com my amplifier is alive again. Many thanx indded!
;
The manual was well-scanned and easy to read. As an added bonus, the Operator's Manual was bundled with the Service Manual!
I'd definitely use owner-manuals.com again.
;
Finally, i found one website, where i can download this service manual , and fix my hifi. The service manual is very good, and easy to download and to print.
;
Complete and very useful. Could have benefited from a little higher resolution on the schematic and layout diagrams for improved legibility.
;
Great Service Manual, Very Complete, as advertised, Perfect, Thanks!
KV-EF34N90
RM-913
6.
SELF-DIAGNOSTIC CIRCUIT
[+B overcurrent ªOCPº]
Occurs when an overcurrent on the +B(135) line is detected by Q604 (A board). If Q604 (A board) go to ON and the voltage to pin 18 of IC301 (A board) should go down when V.SYNC is more than seven verticals in a period, the unit will automatically turn off. Occurs when an overdrive on H drive line is detected by D526 (A board). Power supply will be shut down when detect it. Occurs when an absence of the vertical deflection pulse is detected by Q509 (A board) and IC001 (A board) shut down the power supply. Occurs when an overcurrent on V drive line is detected by Q507 (A board). Power supply will be shut down when detect this by IC001 (A board). If the RGB levels* do not balance or become low level within 5 seconds, this error will be detected by IC301 (A board). TV will stay on, but there will be no picture. * (Refers to the RGB levels of the AKB detection Ref pulse that detects IK.)
[Horizontal deflection overdrive] [Vertical deflection stopped] [Vertical deflection overcurrent] [White balance failure]
�7�
|
|
|
> |
|