There are currently no product reviews.
Easy and secure way to get a complete service manual of a vintage hifi component. Only some parts of the print copy are dificult to read. Nice price!
The manual is an excellent reproduction with complete schematics, made troubleshooting and repair a simple process.
Up to now you are the BEST! Prompt-efficient and so reasonable ! I have been after SONY service manual for quite some time !Thank you very much ! I can recomend your service to
all my collegagues ! V.Bergfield .
This is a very good quality print (scan) of the original SONY service manual. The original from Sony is on very thin paper. Nevertheless it is very clear and sharp and excellent readable. I'm very satisfied to have now this rare document. I've looking for it many years (infrequent). It contains very detailed circuit diagrams, exploded views, part lists, PCB view with good readable connection lines. Very recommended.
A complete manual with all the needed details of calibrations and service instructions about the radio receiver.
A big deal.
Many thanks !
01US01COV-BR2.book Page 39 Wednesday, April 23, 2003 2:44 PM
Using the Menus
Using the Timer
Video Audio Channel Parent Timer Setup Basic
To access the Timer menu, use the following steps:
Timer 1 : Set Timer 2 : Set Current Time
Program the time Move: Select:
Set your TV to the current day and time. Press to open the Current Time menu: 1 Use the F or f buttons to enter the correct day and time, then press .
to exit the menu.
You must set the Current Time before you can use Timer 1 or Timer 2.
Timer 1 and Timer 2 Scheduled viewing
Use the timers to program your TV to turn on and off by day, time, duration, and channel. The timer duration is a maximum of six hours. When the channel is fixed, it is not necessary to set the channel. 1 Use the F or f buttons to highlight Timer 1 or Timer 2, then press .
Use the F or f buttons to enter the desired day, start time, duration, and channel, then press . The timer status should be On when the Timer has been set, and the timer light on the front panel of the TV should be on. Press to exit the menu.
Select Off to turn off the Timer. Your previous settings will be saved. When you perform Auto Program, Timer 1 and Timer 2 settings will be cleared. Also, in the event of any loss of power, Current Time, Timer 1, and Timer 2 settings will be cleared.