There are currently no product reviews.
Everything was ok with the manual. If I have a small complaint, is that I ordered it during the weekend and I think you guys were closed. But I did receive it late Sunday. I will surely order from you again
Best Service! Very fast and easy to handle. Fast Download an you can come back every day to download again
Very good quality, no parts are missing and everthing is readable.
Thank you very much. :-)
This manual is all I need to check and repair my equipment. Thank you....
sorry for my english...the service given by O.M.com is perfect for content and codition...!!!
thank's a lot!!!
01US01COV-BR2.book Page 39 Wednesday, April 23, 2003 2:44 PM
Using the Menus
Using the Timer
Video Audio Channel Parent Timer Setup Basic
To access the Timer menu, use the following steps:
Timer 1 : Set Timer 2 : Set Current Time
Program the time Move: Select:
Set your TV to the current day and time. Press to open the Current Time menu: 1 Use the F or f buttons to enter the correct day and time, then press .
to exit the menu.
You must set the Current Time before you can use Timer 1 or Timer 2.
Timer 1 and Timer 2 Scheduled viewing
Use the timers to program your TV to turn on and off by day, time, duration, and channel. The timer duration is a maximum of six hours. When the channel is fixed, it is not necessary to set the channel. 1 Use the F or f buttons to highlight Timer 1 or Timer 2, then press .
Use the F or f buttons to enter the desired day, start time, duration, and channel, then press . The timer status should be On when the Timer has been set, and the timer light on the front panel of the TV should be on. Press to exit the menu.
Select Off to turn off the Timer. Your previous settings will be saved. When you perform Auto Program, Timer 1 and Timer 2 settings will be cleared. Also, in the event of any loss of power, Current Time, Timer 1, and Timer 2 settings will be cleared.