Actually, I was looking for this information for 3 years!...now thanks to you, the manual is on my hands and of great help, cause I understand now where I was doing wrong connections and wires...excellent, I'll be back to you if in need, thank you.
This manual covers the main equipment features only. While it also includes the procedure for saving and loading from the now long obsolete memory cards it does not mention the how to operate with the optional floppy drive interface so I am still at a loss about how to use this! Note that there is a separate manual covering the MIDI interface and programming via the keyboard, not included in this download. You will also need to get hold of this if you want to use the MIDI interface properly. Basically there is little difference between this manual and the free to download manual for the similar PR60 model.
Good list of manuals. I found a very rare one and easily get. Should be promptly to download, as we must to wait hours even after confirmed payment.
Text excerpt from page 51 (click to view)
KP-53XBR300/61XBR300
RM-Y902 RM-Y902
[GREEN REGISTRATION ADJUSTMENT]
<GREEN CENTER, SIZE> 1. Select GRN CENT or GRN SIZE with the 1and 4 keys on the remote commander. 2. Adjust the crosshatch line goes center horizontally (GRN CENT) and set the size correctly (GRN SIZE) with the joystick on the remote commander.
<FINE ADJUSTMENT> 1. Press 9 key on the remote commander to shift to the fine adjustment mode. The green marker (in the GRN mode) appears on the center of the screen. 2. Use the 1and 4 keys or the joystick on the remote commander, move the marker (see below) everywhere you want to adjust and adjust with the joystic keys on the remote commander.
GRN CENT
000
000
Marker movement by the 1 and 4 keys:
<GREEN SKEW> 1. Select GRN SKEW with the 1and 4 keys on the remote commander. 2. Adjust the crosshatch line goes straight vertically and horizontally with the joystick on the remote commander.
Press once the joystick the marker turns sreen to white. Then you can move the marker up and down left and right.
GRN SKEW
000
000
3. Press 9 key on the remote commander to shift to the rough adjustment mode. <GREEN PINCUSHION> 1. Select GRN PIN with the 1and 4 keys on the remote commander. 2. Adjust the crosshatch line goes straight vertically and horizontally with the joystick on the remote commander.