Thank you for having the manual I needed for an older model Aiwa stero I had found on Ebay --- I wanted the Aiwa because I had tapes and cd's but I did not have a manual as to how to operate the system... I found what I needed and it has enabled me to set the system up for my enjoyment.
helpful manual.good service.Quick response.will use again
Text excerpt from page 24 (click to view)
Using Your New Projection TV (continued)
Using the Yellow Labeled Buttons for PIP Operations
CH
JUMP
or
0-9
and ENTER
or
Press to select the TV channel on which the symbol �b� is displayed. (for details, see �Watching the TV� on page 16) Speed Surf 1 Press and hold CH + or � to change the channel number rapidly. 2 Release to display the desired channel.
REFER TO THE ILLUSTRATION OF THE REMOTE CONTROL ON THE INSIDE FRONT COVER OF THIS MANUAL AS YOU REVIEW THIS CHART
(white labeled button)
ANT
Press to change between the VHF/UHF input and the AUX input for the picture on which the symbol �b� (or �B�) is displayed.
(white labeled button)
AUDIO
Press to alternate sound between the main picture and the window picture. The symbol � � will appear for a few seconds to indicate which picture�s sound is being received. This is useful when you need to copy down information of the main picture. Press to freeze the desired scene in the main picture. The frozen picture is displayed in the window picture while viewing the normal picture in the main picture. The window picture size is automatically changed to 1/9 if it was 1/16. Press again to resume normal PIP viewing. Press to switch the audio and video of the main picture and the window picture. Each time you press SWAP, the picture and sound of the two will be exchanged.
Note: � If one of the pictures received through PIP is snowy, the entire screen may become unstable. In this case, erase the snowy channel. (see �Channel Skip/ Add� on page 27)
