|
Who's Online
There currently are 6037 guests online.
|
Categories
|
Information
|
Featured Product
|
|
|
|
|
There are currently no product reviews.
;
have download a number of manuals todate , most are excellant, one or two sometimes a little difficult to read but a least avaialable, great site .
Brad.
;
Excellent had everything I wanted, very happy with purchase
;
This service is relatively cheap, document is fast available, schematic is readable.
Thanks.
;
So far I´m a satisfied customer. I have only downloaded "TECHNICS SX-KN470 Service Manual" maybe I will use it later.
Best regards
Peter
;
Good manual. It is complete and of high quality, both text and graphics. The schematics are with the original big size, so it can be viewed or printed without any loss of resulution and sharpness.
KDC-3028/328
SPECIAL MODE
� Security � How to enter the forced POWER ON mode
While �� � � �� is being displayed, while simultaneously pressing �Q� key and �4� key, press �RESET� button, With this, it is possible to turn the power on for 30 minutes only.
� DC offset error detection confirmation mode
Confirmation mode : While depressing PRESET �3� key and PRESET �6� key simultaneously, press on the �RESET� button. (Display) Detected : DC _ ERR _ _ Not detected : DC _ OK _ _ _ * By pressing �AUTO� or �TI� key while �DC _ ERR _ _� is being displayed, detection status is cleared. This will result in the display of �DC _ OK _ _ _�. Release Method : Press �RESET� button.
� How to clear the programmable security code
1. While �� � � �� is being displayed, press � � �� display disappear. 2. Input �KCAR�, using the remote controller. Press �5� key of the remote controller twice (Input for �K�) and press � � key. Press �2� key of the remote controller 3 times (Input for �C�) and press � � key. Press �2� key of the remote controller once (Input for �A�) and press � � key. Press �7� key of the remote controller twice (Input for �R�) and press � � key. 3. The security is cleared and the unit enters STANDBY source mode. 4. If wrong codes are input, �� � � �� will be displayed again. � for 3 seconds or more while pressing the �AUTO� key. This makes the �� �
� Mechanism memory clear confirmation mode
Confirmation mode : While depressing �ATT� key and �Q� key simultaneously, press �RESET� button. (Display) : MEM _ CLR _ * Two seconds after the confirmation mode boots up, Mechanism memory clear as a result is displayed. (Display) Clear status display normal completion : CD _ O _ _ _ Clear status display abnormal completion : CD _ X _ _ _ Release Method : Press �RESET� button.
� FM/AM channel space switching
When in the conditions of ACC ON and POWER OFF, while depressing PRESET �1� key and PRESET �5� key simultaneously, press �SRC� key.
11
|
|
|
> |
|