|
Who's Online
There currently are 5503 guests online.
|
Categories
|
Information
|
Featured Product
|
|
|
|
|
There are currently no product reviews.
;
very good manual with clear electrical schemes. Very helpful to find wat was wrong inside my microwave.
;
Hi, thankyou for providing the Nordmende Globetrotter original manufacturer's repair manual. Quality is very good and sharp - the PDF file was comfortably small to download. The only question is: why did it take so long to become ready for download?? Many thanks anyway, I fixed the fault in the radio thanks to the circuit.
regards: Nick
;
This was super service.Ordered this manual and was reading the download an hour later
;
as always, rapid and efficient, very good and clear prints
details clearly visible keep going this way!!!!!!
;
I expect a wonderful result as alaways!!!!!!
Usually is much faster....
SECTION 1 GENERAL
This section is extracted from instruction manual.
Setting the Clock and Date
1 Set the alarm setting dial to ALARM MODE OFF. 2 Plug in the clock radio. The display will flash �AM 12:00� or �0:00�. 3 Press CLOCK for a few seconds. You will hear a beep and the year will start to flash in the display. 4 Press CLOCK + or � until the correct year appears in the display. 5 Press CLOCK once. 6 Repeat steps 4 and 5 to set the month, day, hour, and minute. After setting the minute, press CLOCK to start the counting of the seconds, and you will hear two short beeps. � To display the year and date, press SNOOZE/ DATE/SLEEP OFF once for the date, and within 2 seconds press it again for the year. The display shows the date or year for a few seconds and then changes back to the current time. � To set the current time rapidly, hold down CLOCK + or �. � The clock system varies depending on the model you own. 12-hour system: �AM 12:00� = midnight 24-hour system: �0:00� = midnight � In step 6, when you press CLOCK after the minute setting to activate the clock, the seconds start counting from zero. � When the alarm setting dial is set to ALARM TIME SET A or B, the clock cannot be set. To change the display to the daylight saving time (summer time) indication Press D.S.T./SUMMER T. �s� is displayed and the time indication changes to summer time. To deactivate the summer time function, press D.S.T./SUMMER T. again.
�4�
|
|
|
> |
|