|
Who's Online
There currently are 5808 guests online.
|
Categories
|
Information
|
Featured Product
|
|
|
|
|
There are currently no product reviews.
;
Great manual, great price. Has a few of the basic operating instructions that most service manuals leave out. Complete instructions for disassembling board by board, safety precautions, schematics, complete parts list.
;
I am very pleased with the service manual for my RT-909. This was an easy purchase and great procuct, and much cheaper than other venues i had looked at. This web site is now listed in my favorites list. KEEP UP THE GOOD WORK. THANKS. J. BROWN
;
A very well written and easy to understand manual.
;
There was no problem at all.After paying i had to wait only a few hours,than i could
download the manual in best pdf-quality.
Thank You !
;
I found this service manual to be complete in every detail except for troubleshooting charts. It would be helpful if it had a set of troubleshooting charts; however it is a very good manual otherwise and for the price it is very well worth it.
Section 3 Test Mode (Self-diagnosis)
HKPF-D270 is carried out the self-diagnosis of a defective circuit block in the test mode.
1. Statting of test mode Select DIP switch S5-1 to the lower (ON) position and turn ON the power switch of PFV-HD300/HD50A. Or select DIP switch S5-1 to the lower (ON) position and press system reset switch S1.
2. Lighting confirmation of display lamp All LEDs (from D2, D4 to D6, D8, D9 and D12) light for one second. D12 does not light off.
Inspection point NG Abnormality is found in the LED that is lighted off, its peripheral pattern, and soldering.
OK 3. Confirmation of circuit block LEDs (from D2, D4 to D6, D8 and D9) blink simultaneously. NG Inspection points 1 When D2 lights: Abnormality is found in IC62, its peripheral pattern, and soldering. 2 When D4 lights: Abnormality is found in IC72, its peripheral pattern, and soldering. 3 When D5 lights: Abnormality is found in IC74 and IC 75, these peripheral patterns, and solderings. 4 When D6 lights: Abnormality is found in IC87, its peripheral pattern, and soldering. 5 When D8 lights: Abnormality is found in IC80, its peripheral pattern, and soldering. 6 When D9 lights: Abnormality is found in IC89, its peripheral pattern, and soldering.
OK
Set DIP switch S5-1 to the upper (OFF) position, and turn OFF/ON the power switch of PFV-HD300/HD50A or press the system reset switch (S1).
HKPF-D270 MM
3-1 (E)
|
|
|
> |
|