|
Who's Online
There currently are 6043 guests online.
|
Categories
|
Information
|
Featured Product
|
|
|
|
|
There are currently no product reviews.
;
This is the 2nd time I download manuals from this website and I can say it's what I was expecting. It contains schematic, layout (decent quality), short description, parts and dissasembly instructions. I recomend it for anyone who wants to repair/modify this device.
;
Very useful Service Manual! With it I was able to identify the damaged pots in my old amplifier, purchase the adequate replacements and make myself the repair.
I have again my old amplifier, still a very good one that I will keep for as many years as I can!
Thanks to Owner Manuals!
;
Good price for the manual and easy to locate on the site and download. Plus, just like the original. Thanks a lot.
;
Genuine Service Manual. Link was available in less then an hour or so. Service Manual contains assembly, PCB layout, complete circuit diagram, Components list etc
;
Great and very well scanned Service Manual, also very fast download - Recomended !
2-4. Cleaning Optical Connector
2. When the turn stops, pull out the remover in the straight line forcedly. n The alignment sleeve can be removed/reinstalled with the sleeve itself attached to the tip of the remover. Great care should be taken so as not to lose or damage the alignment sleeve. (Alignment sleeve: Sony P/N 9-980-074-01)
Alignment sleeve
3. Clean the tip of the white optical contacts by a cotton swab moistened with alcohol.
Optical contacts (white)
4. Insert the remover with the alignment sleeve attached to its tip, and push it until it clicks. 5. Rotate the remover counterclockwise to install the alignment sleeve, and extract the remover. Optical connector cable After replacing the optical connector of the camera or HDCU, or replacing the SDI-11/RX-28 board, clean the tip of the white optical contact of the optical connector cable by a cotton swab moistened with alcohol.
Optical contact (white)
2-10 (E)
HDCU-700A
|
|
|
> |
|