I used your service and I found myself well I need service manual teac v plate 770 and I was able to access and remove the belt that erno routes. thanks I recommend it to all
At first I thought there had been a mix up as I required the service manual for the cassette unit and the one supplied was for the CD unit. However when I scrolled further down I realised that both had been scanned together! This enabled me to dismantle and repair the cassette unit as intended and I also have a copy of the manual for both the CD and graphic equaliser units should I ever need them. Thanks very much for a great service.
Excelent service, the manual is complete, very cheap and fast
Alberto
Text excerpt from page 156 (click to view)
HCD-HPZ7/HPZ9
2-13. CONFIRMING THE ASSEMBLING OF THE ARM SECTION
2 Check point 1: The smooth movement of this part when sliding. UPPER SIDE 6 Check point 3: Two parts of the stopper touch the stock base (B).
Note. If the two parts of the stopper do not touch the stock base (B) when the sub slider assy is pushed to the end, the phases are not correctly adjusted. Reassemble the assy.
5 Push the sub slider assy into the end of the arm (R).
1 Release the lock of the sub slider assy and slide it in the direction of the arrow.
stock base (B)
3 Check point 2: All the stocker assy is standing.
4 Slide the stocker assy in the direction of the arrow.