Hi, thankyou for providing the Nordmende Globetrotter original manufacturer's repair manual. Quality is very good and sharp - the PDF file was comfortably small to download. The only question is: why did it take so long to become ready for download?? Many thanks anyway, I fixed the fault in the radio thanks to the circuit.
regards: Nick
Wow very wonderful and clear!!!! I will always trust them
Text excerpt from page 210 (click to view)
5-5. CTL/TC Head Height Adjustment
Adjustment 7. In Case the Level Increases when the Tape is Pressed Down (Fig. 1) Turn the height adjustment screw clockwise and adjust so that the output waveform is maximum. 8. In Case the Level Increases when the Tape is Pushed Up (Fig. 2) Turn the height adjustment screw counterclockwise and adjust so that the output waveform is maximum. In case the adjustment is performed 9. Adjust the CTL/TC Head Azimuth Refer to Section 5-6.
Height adjustment screw
<Fig. 1>
10. Adjust the CTL/TC Head Position Refer to Section 5-7. 11. Check the CTL/TC Head Height Refer to steps 6 and 7 in this section. 12. Check the CTL/TC Head Azimuth Refer to Section 5-6.