|
Who's Online
There currently are 5987 guests online.
|
Categories
|
Information
|
Featured Product
|
|
|
|
|
There are currently no product reviews.
;
Excellent service manual, i didn't believe i could find it for such old product, it is very explanatory, managed to fix the disk player!!!
;
Nice manual. Clear copy and very rare, to boot. Great price, too!
;
Excellent service manual. Complete service info. with schematics, step-by-step instructions and illustrations. Well worth the price!
;
Great product, helped me to restore vintage walkman cassette.
Just some pictures could be little bit more sharp and contrast
Thank you
;
I love older radio's and the service manuals that are sometimes hard to find. Was able to find a manual quite easily on this site.
2-2. MSW Codes � The lower parts of the data of addresses 12, 16 and 1A represent the MSW codes (mode switch, mechanism position) when errors occurs. � The upper parts of the data of addresses 12, 16 and 1A represent, when the mechanism position is to be moved, the MSW codes at the start of movement (when moving the loading motor). � The lower parts of the data of addresses 13, 17 and 1B represent the MSW codes of the desired movement when the mechanism position is to be moved. � Unloading
Mechanism position MSB MODE SW C MODE SW B MODE SW A EJECT BL USE
Releasing lock of cassette campartment
Mechanism Position MSWCode EJECT BL USE LOAD STOP TURN RECP/PB REW 1 7 3 2 6 4 0 5
0 0 0 1 = 1
0 1 1 1 = 7
Loading �
LS chassis movement range
Contents Position at which the cassette compartment lock is released. The mechanism will not move any further in the unloading direction. BLANC code. Between two codes. The mechanism will not be stopped by this code while it is operating. EJECT completion position. When the cassette is ejected, the mechanism will stop at this position. Code during loading/unloading. Code that is used while the LS chassis is moving. Normal stop position. The pinch roller separates, the tension regulator returns, and the brakes of both reels turn on.
Position at which is used when the pendulum gear swings from S to T or from T to S. PB, REC, CUE, REV, PAUSE, FF positions. The pinch roller is pressed and tension regulator is on. REW position. REW are carried at this position. The mechanism will not move any further in the loading direction.
0 0 1 1 = 3
BL
LOAD
BL STOP BL
TURN
BL
REC/PB
BL
REW
0 1 1 1 = 7 0 0 1 0 = 2
0 1 1 1 = 7
0 1 0 0 = 4
0 1 1 1 = 7
Pinch roller is detached
0 1 1 0 = 6
Pinch roller is pressed
0 1 = 7
0 0 0 0 = 0
0 1 1 1 = 7
0 1 0 1 = 5
5-20
$4.99 GV-A500 SONY Owner's Manual Complete owner's manual in digital format. The manual will be available for download as PDF file aft…
|
|
|
> |
|