Great manual...really saved me. The only problem is that I thought I would be able to download it directly when I paid for it but never received the download instructions until the next morning. The board trace pages were somewhat light also: really need to turn up the contrast on the printer before printing them. The schematic page was great; very clear! Well worth the money.
I've been in the electronic business for a long time. I used to buy Sam's Photofact for my needs which intailed having to go to the store and paying about $20 for a package of 3 different units so I was forced to buy more than I needed just to get one.
Owner manual is just at your keyboard and the information is almost instantansouly and the cost is very reasonable. Easy to print out if needed or simply read off of the screen. The larger the screen the better for obvious reasons.
Only thу cover has poor quality, internal material has excellent quality - exactly what I needed
Thanks!
Text excerpt from page 6 (click to view)
1-2. TEST PROCEDURE FOR AUDIO AND VIDEO BOARDS
Installing the Program
To install the test program insert the CD in the CD-ROM drive and start ES-3.Tools.Setup.exe. The ES-3.Tools.Setup.exe. must be installed from the same CD as the ES-3 Edit software on the computer.
Important
Specify the video hard drive connected to the system (e.g. R:) as the target drive for the installation.
� Starting the test
Activate the BIST.exe file to start the program for the audio/video test.
� Selecting the hardware to be tested and the interface to be used
When first called, the BIST program starts automatically with the select window for the various test procedures (Fig. 1).
Figure 1: Selection of test procedure
1. Audio
Testing the audio board with the Built-In Self-Test (first test to be made).
2. Video
Testing the video board with the Built-In Self-Test (second test to be made). Furthermore, in this window you must also select the COM interface (COM1 or COM2) to be used for the RS232 connection to the Main Unit. Here you should select the interface to which the serial cable on the PC is connected.