|
|
|
Who's Online
There currently are 6043 guests online. |
|
Categories
|
|
Information
|
|
Featured Product
|
|
|
 |
|
|
There are currently no product reviews.
 ;
The quality of this manual is good. It has all schematics and setup information for both the MDS-B3 and the MDS-B4. The scan quality is quite good, all pages are readable, This service manual also contains scans of the operating instructions from the User manual.
 ;
Quick site processing. A complete and very useful manual with all details. Thank you!
;
Das Service Manual war von der ersten bis zur letzten Seite sehr informativ und hilfreich. Die Darstellung aller Teile war klar und der Text gut lesbar.
Vielen Dank, das war nicht der letzte Download bei ownner-manuals.com.
;
It's a grate service manuals.Have many details and the writing it's so clear.You have all you want in manual,nothing missing,belive me.I'm verry satisfied of this manual.
;
Great scanned service manual
Usefull informations.
I will buy again!
Best Regards
3-1-3. Setting disc When the number of times of aging is set, the table is opened and the following menu appears. Set a test disc while the following menu is displayed.
### Mecha Aging ### Please Set Disc ENTER : Aging Start RIGHT : Disc Skip (Fwd) LEFT _ : Disc Skip (Rvs)
3-1-5. Terminating the aging operation The aging operation terminates when the following conditions are satisfied. � The aging is performed for the set number of times. � The aging is terminated as x (STOP) or O (RETURN) is pressed. � An abnormality occurs in mechanism. When the aging operation ends normally, table is opened and the following menu appears.
### Mecha Aging ### STOP MaxCount NowCount Disc Number DVD SL 12cm ENTER RIGHT LEFT _ : : : : Aging Stop 50000 50000 1
Exit: RETURN
When you press 5, the tray moves in the direction of Disc Number +1. When you press %, the tray moves in the direction of Disc Number �1. Press [ENTER] to start aging. 3-1-4. While aging is in progress While aging is in progress, the following screen appears.
### Mecha Aging ### STOP MaxCount NowCount Disc Number DVD SL 12cm : : : : Aging Stop 50000 1 1
: Exit : Disc Skip (Fwd) : Disc Skip (Rvs) Exit: RETURN
When you press 5, the tray moves in the direction of Disc Number +1. When you press %, the tray moves in the direction of Disc Number �1. Press [ENTER] to terminate the aging mode after tray is closed and chucked. If any abnormality occurs during the aging mode, the aging operation is stopped and the following menu appears.
### Mecha Aging ### STOP MaxCount NowCount Disc Number DVD SL 12cm : : : : Aging Stop 50000 1 1
Exit: RETURN
Max Count indicates the number of times of aging. Now Count indicates the present number of times of aging. Disc Number indicates the disc number of the present chucking position. The indication �DVD SL 12cm� under the Disc Number indicates the disc type when disc check is performed. In addition to it, the following contents are displayed on the FL display tube. A B� C
Table Error! (*1) Table Close Error! (*2) Push Any Key _ Exit: RETURN
*1 indicates the mechanical part where error occurs. *2 shows the mode when error occurs.
�A� indicates the aging mode. 1: All (DiscCheck On) 2: All (DiscCheck Off) 3: Table 4: Tray �B� indicates the aging operation. (Disc number is displayed during the Tray aging mode.) 1: Table Close 2: Chuck Up 3: DiscCheck 4: Table ExOpen 5: Tray ExMove 6: Table ExClose 7: Chuck Down 8: Table Open �C� indicates the number of times of aging. If you press x (STOP) or O (RETURN) during aging, the aging operation is terminated. If you press X (PAUSE) during aging, the aging operation is paused. Pressing any key resumes the aging operation.
6-23
|
|
|
> |
|
