|
Who's Online
There currently are 6043 guests online.
|
Categories
|
Information
|
Featured Product
|
|
|
|
|
There are currently no product reviews.
;
Very pleased with the whole process. Great commication and very easy instructions to order and to download the manual.
;
It's a good manual, this one it's a scan from the original factory service manual, great quality 100% readeable. definetely it worths what I paid for.
;
A good manual! fast service and good qualityi for pdf document.
thanks!
;
Very helpful and complete manual. Maybe only one negative is schematics have sometimes unreadable name of the parts. But it's not a big problem.
;
Excellent high quality schematics brought my old Heidelberg back to life. Fast download at a reasonable price. Thanks.
ENGLISH
1-5. HOW TO WRITE DATA TO INTERNAL MEMORY
JAPANESE
Usually, the camera has been set so as to disable the data writing from the PC to the internal memory of the camera. This setting must be changed temporarily when the data is to be written to the internal memory such as a case after the board replacement. To change the setting, use the write enable tool �WriteEnableTool.exe�.
Data writing method
1) 2) 3) Connect the PC to the camera (USB mode: Mass Storage), and switch the driver to the �Sony Seus USB Driver�. Start the Write Enable Tool and the SeusEX. Click the [Activate Write Enable Mode] button of the Write Enable Tool.
4)
Upon completion of the setting change, the following message will be displayed.
5) 6) 7)
Return the driver to the original one, and connect the PC to the camera (USB mode: Mass Storage). Write the data read out into the PC to the internal memory of the camera. Disconnect the PC from the camera, and turn off the camera.
Note: By turning off the camera, the write enable setting is reset.
DSC-W80/W85_L2
1-4
|
|
|
> |
|