I am only search for 5 Minute, by it in 5 Minutes to and get ist in few ours! Best i found in the Internet and my Amplifer is repaired as well! Thank you
Text excerpt from page 63 (click to view)
3-1-4. JD-43 Board
1. Remove the upper cabinet assembly. (Refer to Section 2-2-1.) 2. Remove one screw, then remove the JD-43 board. 3. Disconnect one harness from the JD-43 board.
3-1-5. PE-43 Board
1. Remove the upper cabinet assembly. (Refer to Section 2-2-1.) 2. Remove the DK-43 board. (Refer to Section 3-1-1.) 3. Remove the hook securing the PE-43 board in the direction indicated by the arrow, then remove the PE43 board. 4. Disconnect one harness from the PE-43 board.
Harness MD-43 board P 2x3
4. Attach a new JD-43 board in the reverse order of steps 1 to 3.
Paper feed frame assembly Harness PE-43 board
5. Attach a new PE-43 board in the reverse order of steps 1 to 4.