Thank you, this is a rare document. Few others have it, but they charge way more for a download.
Great deal (even if you have to wait a few hours to get it).
The purchased manual is an scan of the original Panasonic paper-based Service Manual. Unfortunately the contrast is not perfect, but I am satisfied anyway!
The purchased manual is an high-quality scan of the original JVC paper-based Service Manual. The Service Manual includes the Owner´s Manual, so you do not have to buy both of them.
It paid to find this Service Manual, couldn't find it anywhere else. Exactly what I wanted. Received within 24 hours.
Text excerpt from page 19 (click to view)
3-1-5. Writing the EEP ROM
1. Start up the adjustment program VL500_Adj and click [MODE] and select [Adjust|Mode]. 2. Click [Initialize|EEPROM]. (It takes approximately 30 seconds for writing.) 3. Click [Start], and confirm that the camera shooting picture appears on the PC monitor. 4. Click [Stop]. 5. Click [Exit].
3-2. ADJUSTMENT
3-2-1. Setting
1. Start up the adjustment program VL500_Adj.exe and click [ADJ|Mode]. 2. Click [Start], and confirm that the camera shooting picture appears on the PC monitor. Confirm also that the POWER indicator LED (D800 on the IF-318 board) changes from green to orange.
3-2-2. Flange Back Adjustment (DFW-VL500 only)
Subject : Siemens Start chart 1. 2. 3. 4. 5. 6. Click [AE|Manual] And select [Manual]. Click Iris and set Iris to [Open]. Click [Zoom] and set the zoom to the Tele end. Drag the Zoom Offset slider and obtain the best focus. Click [Zoom] and set the zoom to the Wide end. Drag the Focus Offset slider and obtain the best focus.