|
|
|
Who's Online
There currently are 5808 guests online. |
|
Categories
|
|
Information
|
|
Featured Product
|
|
|
 |
|
|
There are currently no product reviews.
 ;
Found website easy to use and manual very clear. First class service
 ;
The quality is quite good and clear. Nothing of the informations inside is lost during the digitalizing process
;
Very good service, fast downloads and good manuals.
;
Good qulity. Even as it is an old manual (from 1991-1992) it has a good scanned quality and is complete, including user's manual, disassembly intructions, diagrams and schematics, ajustments, troubleshooting and parts list, as usual with SONY manuals and Owner-manuals service.
;
tres bon document
cela a permis de verifier la connection de l'ecran
merci
salutations
D-EJ985
Remote Commander LCD display
010001 040004
(1 time)
(4 times)
(For the rest, turn the power off and then turn it on again) �
[SOUND] button on remote commander
Servo auto adjustment
4. Service Mode Releasing Method To release the service mode, perform as follows. 1) Turn the power off. 2) Open the solder bridge at the SL807 (TEST) on the MAIN board.
Note: Remove the solder completely.
5. Error Rate Check Display The C1 error rate check display mode becomes active if the following operation is performed during the operation in the normal mode. 1) Turn the power off, and cancel other service operations. 2) Turn the power on, and then set a CD and play it with the X button on the remote commander. Remote Commander LCD display
0000
3) Press the [SOUND] button on the remote commander to make automatic adjustment. 4) Press the [PLAY MODE] button on the remote commander. Remote Commander LCD display
010001
5) Press the [DISPLAY] button on the remote commander, and the C1 error rate display will be activated and the LCD on the remote commander will display as follows.
Remote Commander LCD display
Er****
**** value 0000 to 0099 : OK more than 0100 : NG
Note: In the play state, press the [SOUND] button on the remote commander before pressing the [PLAY MODE] button. Wrong order of button operations will result in very large Er**** value.
6) Turn the power off. 7) Open the solder bridges at the SL807 (TEST) on the MAIN board.
Note: Remove the solder completely.
5
 $4.99 D-EJ985 SONY
Owner's Manual Complete owner's manual in digital format. The manual will be available for download as PDF file aft…
|
|
|
> |
|
