There are currently no product reviews.
The purchased manual is an high-quality scan of the original JVC paper-based OwnerΒ΄s Manual. I am very satisfied!
Very satisfied with received document, all is right, Thank You very much, it was a Pleasure to work with You.
great site, the most easy and fastest way to find the manual you need, no 5 star because the manual was only available in german, but I speak german as well so no problem for me.
thanks for this download i got a pioneer bdp-lx70a blu-ray player and it had no manual i search everywhere on the internet and came across owner-manuals.com and i found that it was so easy to find and downloaded from this site if i ever need a manual again this would be the first place that i would come too thanks guys
Superb! It's the original manual. We can now use our old calculator with its full function.
To 3-867-525-11 (1) Pause (main unit only) Resume play after pause (main unit only) Find the beginning of the current track (AMS*) Find the beginning of previous tracks (AMS) Find the beginning of the next track (AMS) Find the beginning
Press ^ ^
zOther Operations Playing tracks repeatedly
Playing tracks in random order (Shuffle Play)
You can play the tracks in a CD in random order.
Using other functions
The ESP (Electronic Shock Protection) function minimize skipping by using a buffer
Playing a CD right away!
Compact Disc Compact Player
About area code
The area code of the player you purchased is shown on upper left of the bar code label on the package. For accessories supplied with your player, check the area code of your model and refer to âSupplied accessoriesâ toward the end of this manual.
To minimize skipping (ESP2)
You can play tracks repeatedly in normal, INTRO PGM, shuffle or RMS (Random Music Sensor) play modes. Repeat all the tracks or only one track.
If you want to play a CD right now, choose to use your player on house current. Other choices are the following three: rechargeable battery, dry batteries (see âPower Sourcesâ on the reverse side) and car battery.
During play, press PLAY MODE repeatedly until âSHUFâ appears. The tracks play in random order.
memory that stores music data and plays it back in the event of a shock. The new ESP2 (ESP Squared) system uses a new DSP (Digital Signal Processor) which can read and store music data more efficiently, providing a level of continuous skip protection not found in traditional buffer memory units. This decreases the frequency of sound skipping and the need to utilize the buffer memory. Use this function when listening in a car or while walking.*
* Although ESP2 provides excellent protection against skipping, it will not prevent skipping while jogging or running. ESP
to a wall outlet
To repeat all the tracks
Press REPEAT/ENTER during play. The â â indication appears. To cancel shuffle play, press PLAY MODE repeatedly until the play mode indication disappears from the display. Note
â¢ During shuffle play, you cannot return to
of succeeding tracks (AMS) Go forward quickly Go backwards quickly Hold down +** Hold down =**
*AMS = Automatic Music Sensor
To cancel repeat play, press REPEAT/ENTER again.
previous tracks by pressing = .
Press ESP. The ESP indication appears.
AC power adaptor
**These operations are possible during both play and pause. If you press REPEAT/ENTER to display â â, you can locate the tracks continuously in the following order:
To repeat a single track
1 Press REPEAT/ENTER while the track you want to repeat is playing. The â â indication appears.
DC IN 4.5 V
â¢ When using +: next track n next track ...... last track n first track n second track ...... â¢ When using =: previous track n previous track ...... first track n last track ......
Playing tracks in the order you want (RMS play)
You can program up to 22 tracks to play in any order you choose.
To release the ESP function, press ESP again. Notes
â¢ Playing may stop when the player gets a strong shock even with the ESP function on. â¢ You may hear a noise or sound skip when: â listening to a dirty or scratched CD, â listening to an audio test CD or, â the player receives continuous shock. â¢ Sound may drop for a while if you press ESP during play.
D-E451 D-E455 D-E456CK D-E459CK
Sony Corporation Â©1999 Printed in Malaysia
To remove the CD
Remove the CD while pressing the pivot.
2 Press PLAY MODE repeatedly until â1â appears.
To repeat another track, press = or + . For models supplied with the remote control
â¢ Connect the plug of the headphones to the remote control. â¢ Connect the headphones to the remote control firmly. A loose connection may cause noise during playback.
To enjoy more powerful bass sound (Sound function)
=/+ You can enjoy a powerful bass-boosted sound.
To cancel repeat play, press REPEAT/ENTER again.
During play, press PLAY MODE repeatedly until âRMS*â flashes.
Thank you for purchasing the Sony Compact Disc Compact Player. Before operating your player, please read this manual and retain it for future reference.
About this manual
The instructions in this manual are for the D-E451, D-E455, D-E456CK and D-E459CK. Before you start reading, check your model number. The D-E451 is the model used for illustration purposes.
For the customers in the USA
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: - Reorient or relocate the receiving antenna. - Increase the separation between the equipment and receiver. - Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. - Consult the dealer or an experienced radio/TV technician for help. You are cautioned that any changes or modifications not expressly approved in this manual could void your authority to operate this equipment.
Place a CD
Notes on controlling the volume with the remote control
Set the VOL (volume) control on the remote control to the maximum. Then adjust the volume on the player to the level that you want to be the maximum volume of the remote control.
Playing only the tracks you want (INTRO PGM Play)
You can choose and play your favorite tracks by scanning through the beginning of each track in a CD.
PLAY MODE ^ Track number
SOUND Flashing *RMS = Random Music Sensor Press SOUND to select âMB (Mega Bass)â or âGRV (Groove).â âGRVâ is more effective.
Notes on display
â¢ When you press ^ or ( (when RESUME is set to OFF), the total number of tracks in the CD and the total playing time appear for about 2 seconds. â¢ During play, the track number and the elapsed playing time of the current track appear. â¢ During pause, the elapsed playing time flashes in the display. â¢ Between tracks, the time to the beginning of the next track will appear with the âââ indication.
Press = or + to choose a track. The track number and the playing order appear.
â¢ If the sound is distorted when emphasizing bass, turn down the volume.
To lock the buttons
You can lock your player against any accidental operations. You can still operate the player with the remote control.
The model and the serial numbers are located at the bottom. Record these numbers in the spaces provided below. Refer to them whenever you call upon your Sony dealer regarding this product. Model No. __________ Serial No.__________
During play, press PLAY MODE repeatedly until âINTRO PGMâ flashes.
3 4 5
Press REPEAT/ENTER to program the track. Repeat steps 2 and 3 to program the remaining tracks. Press ^ . âRMSâ stops flashing and the tracks you have chosen play in the order you specified.
Label side up
Illumination of the display (D-E456CK and D-E459CK only)
When using the player on the AC power adaptor or car battery, the display on the player is always illuminated. (Light of the display goes out when you press p and the CD stops.) When you use the player on the rechargeable batteries or alkaline batteries, the display is illuminated for about 5 seconds when you press any operation button. But, when using the optical digital connecting cord, the display is not illuminated.
1 Press OPEN to open the lid.
2 Fit the CD to the pivot.
To prevent fire or shock hazard, do not expose the unit to rain or moisture. To avoid electrical shock, do not open the cabinet. Refer servicing to qualified personnel only.
The use of optical instruments with this product will increase eye hazard.
For the customers in Australia
The supply cord of the AC power adaptor cannot be replaced; if the cord is damaged, the AC power adaptor should be discarded.
Press ^ to start scanning . The player plays about the first 15 seconds of each track and âINTRO PGMâ flashes faster. Press REPEAT/ENTER while the track you want is playing. To skip the track, press + or just wait for the next track.
If you press p, the program will be erased. To prevent accidental erasure, set the RESUME switch to ON. To cancel RMS play, press PLAY MODE until âRMSâ disappears.
1 Press ^.
To use the remote control
Slide HOLD in the direction of the arrow. When you press any button, âHoldâ appears in the display and you cannot operate the player. To unlock, slide HOLD back.
For the customers not in Europe
The CE mark on the unit is valid only for products marketed in the European Union.
Notes on handling CDs
â¢ To keep the CD clean, handle it by its edge. Do not touch the surface. â¢ Do not stick paper or tape onto the CD. â¢ Do not expose the CD to direct sunlight or heat sources such as hot air ducts. Do not leave the CD in a car parked under direct sunlight.
1 Press (.
After you have gone through the CD, âINTRO PGMâ stops flashing and the tracks you have chosen play automatically. To finish programming before going through the whole CD, press ^. The selected tracks will be played. If you press p, the program will be erased. To prevent accidental erasure, set the RESUME switch to ON.
To check the program
During programming: Press REPEAT/ENTER before step 5. During RMS play: Press PLAY MODE repeatedly until âRMSâ flashes, then press REPEAT/ ENTER. Each time you press REPEAT/ENTER, the track number and the playing order appear in the order you specified. Note
â¢ If you program another track after the 22nd track, the first track programed is cleared and the new track is programed instead.
Continue to the reverse side m
2 Adjust the volume. 2 Adjust the volume.
To stop play, press p.
Not these ways
To cancel INTRO PGM play, press PLAY MODE repeatedly until the play mode indication disappears from the display.
Complete service manual in digital format (PDF File). Service manuals usually contains circuit diagr…