Again a great job. I never been disilluted from them! Clear scheme, complete and very good for repairing!
Text excerpt from page 113 (click to view)
DCR-TRV12E/TRV14E/TRV19/TRV19E
2-9. HINGE (40) ASSEMBLY
Caution
2
Rotation of the LCD panel has limitation due to its hinge in this model. Excessive force to rotate the LCD panel damages the hinge. (Refer to "Caution"of 2.1 Pcabinet assembly.)
A
1 Screw 2 Rotate to the "A" marked portion (M1.7 � 4), counterclockwise by 90 degrees lock ace, p2
Caution
If the FP-626 flexible board is removed once, the adhesion strength of a double-sided tape decreases. Use the new FP-626 flexible board at the time of an assembly.
8 Remove the FP-626 flexible board that is attached by the doble-sided tape 3 7 Hinge cover (M) (40)
Dowel for setting the position
B 4 Three claws
3
6 Screw (M1.7 � 4), lock ace, p2
3 Rotate the "B" marked portion counterclockwise by 90 degrees in the direction of the arrow
Hinge (40) assembly
5 Hinge cover (C) (40)
0 Hinge (40) assembly
Remove the Harness (PV-140) in the direction of the arrow
