I found this manual to be complete in every detail. Besides the schematic it has a complete set of alignment instructions which are easy to understand. It also includes a complete parts list as well as an explanation of how the power supply and safety shutdown circuits operate. Even a schematic of the tuner is included.
The product was good and just what I needed, however I had moderate difficulty with the down load because the sight would not recognize my pass word. I was finally given a direct link to the manual and that worked.
Very quick and easy website to use and fast download of manual, quality of manual is excellent and will be pleased to use this service again in the future, thanks so much!
Easy to order the manual. Good quality and fast delivery.
Text excerpt from page 11 (click to view)
Disassembly and reassembly
3-2 Main Board Removal
3
1 2
11 4 13
8
5 7
12 6 9 10
1. Separate the TBC-wire 2P connector from GT501,GT502. 2. Separate the CRT Assembly from the CRT socket. 3. Remove the Anode Cap from the CRT. 4. Separate the D-Coil Connector from CN802. 5. Separate the AC cord from CN801. 6. Separate the DC connector from CN401. 7. Separate the CN501B 8P CRT connector from CN501. 8. Separate the CNA05 5P A/V side connector from CN602. 9. Separate the CNA01 8P CRT connector from CN701. 10. Separate the Focus Screen Wire from the FBT clamper. 11. Separate the TBC wire 2P, speaker wires from the wire clamper. 12. Separate the CN701, CN602 connector from the wire clamper. 13. Separate the AC cord from the wire clamper. 14. Remove the main board by pulling it with both hands.