SONY CRX10U
User Guide

Handling Discs
� Handle discs only by the edges. Do not touch the recording surface of the disc.

� Never wipe a CD-R or CD-RW disc with a cleaning solution before recording data on the disc. Use a blower to blow any dust off of the surface of the disc. � Scratches or dust on the unrecorded portion of a CD-R or CD-RW disc may prevent proper data recording. Handle discs carefully.

� Except where specified by the disc manufacturer or warranty, do not write on or attach labels to discs.

Battery Pack Considerations
� The correct battery pack for the CRX10U is the Sony NP-F550. One pack is supplied with the drive, but additional packs can be purchased separately. � The CRX10U does not support the power management feature of the NPF550 InfoLithium battery pack. � Charge the battery pack using the CRX10U with the provided AC adapter (AC-CRX10U). � The battery pack is partially charged before shipping, but you should charge it completely before use. � The battery pack gradually discharges itself when not being used, so even after it has been fully charged, we recommend recharging before use (if more than a day or two has passed). � Charge the battery pack where the surrounding temperature is in the range from 10 to 30°C. This will provide longer battery operation. � If the battery is not used for a long time, it should be charged and then discharged completely before storage, and once each year to maintain its usability.

� Do not store discs in a dusty or dirty location, in direct sunlight, near a heater or in a humid location. � Do not spill liquids on a disc. � To protect valuable data, always store discs in their cases. � Gently wipe discs with a soft cloth, from the center straight towards the outer edge. If a disc is very dirty, wet the cloth with water, wring it out thoroughly, wipe the disc with the damp cloth and then use a dry cloth to wipe any moisture off of the disc. Do not use benzene, record cleaner, anti-static solutions or other liquids, as they can damage the disc.

35