There are currently no product reviews.
ThankΒ΄s for your help, I already recived these manual from you
Thank you for your manual It has the basic things to and i use the Oszi for Longer Time.
Actually, I was looking for this information for 3 years!...now thanks to you, the manual is on my hands and of great help, cause I understand now where I was doing wrong connections and wires...excellent, I'll be back to you if in need, thank you.
This manual covers the main equipment features only. While it also includes the procedure for saving and loading from the now long obsolete memory cards it does not mention the how to operate with the optional floppy drive interface so I am still at a loss about how to use this! Note that there is a separate manual covering the MIDI interface and programming via the keyboard, not included in this download. You will also need to get hold of this if you want to use the MIDI interface properly. Basically there is little difference between this manual and the free to download manual for the similar PR60 model.
Good list of manuals. I found a very rare one and easily get. Should be promptly to download, as we must to wait hours even after confirmed payment.
â¢If your car was parked in direct sunlight, allow the unit to cool off before operating it. â¢Power antennas will extend automatically while the unit is operating. If you have any questions or problems concerning your unit that are not covered in this manual, please consult your nearest Sony dealer.
Notes on discs
â¢To keep the disc clean, do not touch the surface. Handle the disc by its edge. â¢Keep your discs in their cases or disc magazines when not in use. Do not subject the discs to heat/high temperature. Avoid leaving them in parked cars or on dashboards/rear trays.
Notes on CD-R discs
â¢You can play CD-Rs (recordable CDs) designed for audio use on this unit. Look for this mark to distinguish CD-Rs for audio use.
On a rainy day or in a very damp area, moisture condensation may occur inside the lenses and display of the unit. Should this occur, the unit will not operate properly. In such a case, remove the disc and wait for about an hour until the moisture has evaporated.
This mark denotes that a disc is not for audio use.
â¢Do not attach labels, or use discs with sticky ink/residue. Such discs may stop spinning when used, causing a malfunction, or may ruin the disc. â¢Some CD-Rs (depending on the equipment used for its recording or the condition of the disc) may not play on this unit. â¢You cannot play a CD-R that is not finalized*.
* A process necessary for a recorded CD-R disc to be played on the audio CD player.
To maintain high sound quality
Be careful not to splash juice or other soft drinks onto the unit or discs.
â¢Discs with special shapes (heart-shaped discs, octagonal discs, etc.) cannot be played on this unit. Attempting to do so may damage the unit. Do not use such discs. â¢You cannot play 8cm (3in.) CDs. â¢Before playing, clean the discs with a commercially available cleaning cloth. Wipe each disc from the center out. Do not use solvents such as benzine, thinner, commercially available cleaners, or antistatic spray intended for analog discs.
When replacing the fuse, be sure to use one matching the amperage rating stated on the original fuse. If the fuse blows, check the power connection and replace the fuse. If the fuse blows again after replacement, there may be an internal malfunction. In such a case, consult your nearest Sony dealer.
Under normal conditions, batteries will last approximately 1 year. (The service life may be shorter, depending on the conditions of use.) When the battery becomes weak, the range of the card remote commander becomes shorter. Replace the battery with a new CR2025 lithium battery.
Replacing the lithium battery
Removing the unit
Remove the front cover 1 Detach the front panel. 2 Press the clip inside the front cover with a thin screwdriver.
Fuse (10 A)
Warning Never use a fuse with an amperage rating exceeding the one supplied with the unit as this could damage the unit.
+ side up
3 Repeat step 2 for the other side.
Remove the unit 1 Use a thin screwdriver to push in the clip on the left side of the unit, then pull out the left side of the unit until the catch clears the mounting.
Cleaning the connectors
The unit may not function properly if the connectors between the unit and the front panel are not clean. In order to prevent this, open the front panel by pressing (RELEASE), then detach it and clean the connectors with a cotton swab dipped in alcohol. Do not apply too much force. Otherwise, the connectors may be damaged.
Notes on lithium battery
â¢Keep the lithium battery out of the reach of children. Should the battery be swallowed, immediately consult a doctor. â¢Wipe the battery with a dry cloth to assure a good contact. â¢Be sure to observe the correct polarity when installing the battery. â¢Do not hold the battery with metallic tweezers, otherwise a short-circuit may occur.
2 Repeat step 1 for the right side. 3 Slide the unit out of its mounting.
Back of the front panel Notes â¢ For safety, turn off the engine before cleaning the connectors and remove the key from the ignition switch. â¢ Never touch the connectors directly with your fingers or any metal device.
Battery may explode if mistreated. Do not recharge, disassemble, or dispose of in fire.
Complete service manual in digital format (PDF File). Service manuals usually contains circuit diagr…