There are currently no product reviews.
Thanks so much for the Owner's manual for my Sony PS - FL1. I had purchased the turntable off of eBay. It came in and looked great. Packed well and appeared to be great. I balanced and aligned the tone are and hooked it up. When trying to play a record the tone are would move to the right place and just before it would drop to play it moved back off the edge of the record before touching down. I searched the net for an answer to this issue. No luck. Then I purchased the owners manual and sure enough there was a place to adjust where the stylus touched down. That adjustment solved the problem and saved me a $35 feet to have the player checked out. The manual is well written and easy to understand. It is a must have for anyone with this front loading Sony turntable.
Some years back I pruchased a Sansui G-9000. I had it cleaned up and a problem with the left channel repaired. When I got it back I hooked it up to my tape decks, turn tables, TV and it played great. The only thing I was not really satisfied with was the performance of my Graphic Equalizer. I purchased this owner's manual had poured myself a cup of coffee. The manual is well organized and written in plain language. It also contained the solution to my dissatisfaction. By using the preamp connections coupled I was able to run everything through my graphic equalizer and now enjoy the full potential of my complete system.
An excellent service for the price, however, it would also have been handy if the troubleshooter pages were included. The manual is only sent in the language of your country, thus it looks as though there are some pages missing. Otherwise highly recommended.
I am happy to get a rare TECHNICS SH-9090 Owner's Manual by PDF in clear copy.
Hr, klasse , good manual, verry fast on my e-mail, very usefull manual. rgds; ahm zeegers
CDX-FW550 only sÃ³lo CDX-FW550
AUDIO OUT FRONT
FM/AM Compact Disc Player
AUDIO OUT REAR
BUS AUDIO IN
BUS CONTROL IN
BUS AUDIO IN
Source selector* Selector de fuente* XA-C30
Â© 2004 Sony Corporation Printed in Korea
BUS CONTROL IN
* not supplied no suministrado
1 2 3
â¢ This unit is designed for negative ground 12 V DC operation only. â¢ Do not get the leads under a screw, or caught in moving parts (e.g. seat railing). â¢ Before making connections, turn the car ignition off to avoid short circuits. â¢ Connect the yellow and red power input leads only after all other leads have been connected. â¢ Run all ground leads to a common ground point. â¢ Be sure to insulate any loose unconnected leads with electrical tape for safety. â¢ The use of optical instruments with this product will increase eye hazard. Notes on the power supply lead (yellow) â¢ When connecting this unit in combination with other stereo components, the connected car circuitâs rating must be higher than the sum of each componentâs fuse. â¢ When no car circuits are rated high enough, connect the unit directly to the battery.
Connection example (2)
â¢ Be sure to connect the ground lead before connecting the amplifier. â¢ If you connect an optional power amplifier and do not use the built-in amplifier, the beep sound will be deactivated. Tip (2-B- ) For connecting two or more CD/MD changers, the source selector XA-C30 (optional) is necessary. Notes (2-A)
Connection diagram (3)
1 To a metal surface of the car
First connect the black ground lead, then connect the yellow and red power input leads. 2 To the power antenna control lead or power supply lead of antenna booster amplifier Notes â¢ It is not necessary to connect this lead if there is no power antenna or antenna booster, or with a manually-operated telescopic antenna. â¢ When your car has a built-in FM/AM antenna in the rear/side glass, see âNotes on the control and power supply leads.â
Equipment used in illustrations (not supplied) Equipo utilizado en las ilustraciones (no suministrado)
Parts Iist (1)
Power amplifier Amplificador de potencia
Front speaker Altavoz frontal
â¢ The numbers in the list are keyed to those in the instructions. â¢ The bracket 1 and the protection collar 3 are attached to the unit before shipping. Before mounting the unit, use the release keys 5 to remove the bracket 1 and the protection collar 3 from the unit. For details, see âRemoving the protection collar and the bracket (4)â on the reverse side of the sheet. â¢ Keep the release keys 5 for future use as they are also necessary if you remove the unit from your car.
3 To AMP REMOTE IN of an optional power
amplifier This connection is only for amplifiers. Connecting any other system may damage the unit.
4 To the interface cable of a car telephone 5 To the +12 V power terminal which is energized
in the accessory position of the ignition key switch Notes â¢ If there is no accessory position, connect to the +12 V power (battery) terminal which is energized at all times. Be sure to connect the black ground lead to a metal surface of the car first. â¢ When your car has a built-in FM/AM antenna in the rear/side glass, see âNotes on the control and power supply leads.â 6 To the +12 V power terminal which is energized at all times Be sure to connect the black ground lead to a metal surface of the car first.
Rear speaker Altavoz posterior
CD/MD changer Cambiador de CD/MD
Handle the bracket 1 carefully to avoid injuring your fingers.
Active subwoofer Altavoz potenciador de graves activo Rotary commander RM-X4S Mando rotatorio RM-X4S
Catch Note Before installing, make sure that the catches on both sides of the bracket 1 are bent inwards 2 mm (3/32 in). If the catches are straight or bent outwards, the unit will not be installed securely and may spring out.