|
Who's Online
There currently are 5813 guests online.
|
Categories
|
Information
|
Featured Product
|
|
|
|
|
There are currently no product reviews.
;
perfect! you just sent to me the copy in Italian witout even my specification!!!! so you are really smart cooperative and efficient. To my opinion the best place all over to get a manual of electronics!!!!
;
Well Well Well!!!! Good manual perfect for my hobby!!! As Before you have done a very well done work!!!! Thank you
;
Super nice! Good to have a manual in digital format.
;
Great job supplying the manual.
Many of these products weerepretty obscure, so it was great that you had
the manual for it!
;
Great manual, would not have been able to operate my machine without it!!
James Dawson August 18, 2012
Storing station names
� Station Memo
You can assign a name to each radio station and store it in memory. The name of the station currently tuned in appears in the display. You can assign a name using up to 8 characters for a station.
5
Press (ENTER).
Tips � Simply overwrite or enter �_� to correct or erase a name. � There is another way to start storing station names: Press (LIST) for 2 seconds instead of performing steps 2 and 3. You can also complete the operation by pressing (LIST) for 2 seconds instead of step 5.
Storing the station names
Displaying the station name
Switch the display item to frequency or station name*. To Switch display item Press (DSPL) during radio reception
1 2
Tune in a station whose name you want to store. Press (MENU), then press either side of (DISC/PRESET) repeatedly until �NAMEEDIT� appears. Press (ENTER).
3
* If the station name is not stored, �NO NAME� appears in the display for one second.
Erasing the station name
1 4
Enter the characters. 1 Press the (+)*1 side of (DISC/PRESET) repeatedly to select the desired character. AtBtC�t0t1t2� t + t � t � t _*2 t A
During radio reception, press (MENU), then press either side of (DISC/PRESET) repeatedly until �NAME DEL� appears. Press (ENTER). Press either side of (DISC/PRESET) repeatedly to select the station whose name you want to erase. Press (ENTER) for 2 seconds. The name is erased. Repeat steps 3 to 4 if you want to erase other names. Press (MENU) twice. The unit returns to normal radio reception mode.
2 3
*
*1 For reverse order, press the (�) side of (DISC/PRESET). *2 (blank space)
4
2 Press the (+) side of (SEEK) after locating the desired character.
5
If you press the (�) side of (SEEK), you can move back to the left. 3 Repeat steps 1 and 2 to enter the entire name.
Note If you have already erased all of the station names, �NO DATA� appears in step 4.
15
|
|
|
> |
|