|
Who's Online
There currently are 6040 guests and 3 members online.
|
Categories
|
Information
|
Featured Product
|
|
|
|
|
There are currently no product reviews.
;
This manual is very good. 303 pages scanned in a very high resolution. My camera has bad, leaking capacitors which all of the V5000 models are suffering from these days.
There is a huge part list with all capacitors, transistors etc. in this manual which helped me a lot. Otherwise I would not have been able to buy replacement parts.
The dissassembly guide is very enormous and detailed. Unlike on the Panasonic MS1 manual I downloaded here it actually looks like the real parts look. And the screws are labeled correctly, so you shouldn't have any left after the repair. ;)
;
has all the schematics you could need,and very well laid out format also has all part numbers along with an exploded view which is helpful
;
Very nice to have! Now it is no problem to understand how it is put together.
Helps me a lot.
;
good scans, all is clear. all pages in order. recommended
;
Très-très bon site, facile, très bon prix.
Au futur besoin, je n’hésiterais à faire appel à vous.
Merci
PULLY AND DISC CENTER HOLE ALIGNMENT
cam base unit
cam bracket (BU adjustment)
(1)
Rotate the cam and adjust to the position shown in the figure.
magnet ass�y
(2)
Check that the state is as shown in the figure.
0.5 � 2 mm disc disc pulley disc hole base unit
Note: The disc should not be fixed.
holder (disc A2)
fixed screw
bracket (BU adjustment)
tapering screwdriver magnet ass�y
(3)
Remove the Magnet ass�y.
(4)
Loosen the fixed screw by 60° to 90°, and move and adjust the bracket (BU adjustment) up and down using a tapering screwdriver so that the positions of the disc hole and disc pulley become A=B or between A:B=2:1 and 1:2.
� 17 �
|
|
|
> |
|